On 27/06/06, Shanon Mulley <shanonmulleyster@xxxxxxxxx> wrote:
I'm reading the bit about lirc configuration. Although it details 2 lirc files, it doesnt mention the lircd.conf file. Should I just use the one that comes with lirc0.8.1? (lircd.conf.fusionHDTV).
Give that file a go, and if irw tells you you're pressing the buttons that you really are, then you're fine. I got no output from irw because that lircd.conf didn't match my remote. I created my own config file using irrecord, feel free to try it. Note I had to change the toggle_bit to 0 since every button press was detected as two. I spotted the solution in this thread <http://www.linuxtv.org/pipermail/linux-dvb/2006-June/010991.html>. -Nick # Please make this file available to others # by sending it to <lirc@xxxxxxxxxxxx> # # this config file was automatically generated # using lirc-0.8.0(devinput) on Tue Jun 27 01:29:53 2006 # # contributed by # # brand: DVICO_MCE # model no. of remote control: # devices being controlled by this remote: # begin remote name DVICO_MCE bits 16 eps 30 aeps 100 one 0 0 zero 0 0 pre_data_bits 16 pre_data 0x1 gap 251888 toggle_bit 0 begin codes 1 0x0002 2 0x0003 3 0x0004 4 0x0005 5 0x0006 6 0x0007 7 0x0008 8 0x0009 9 0x000A 0 0x000B DTV 0x0179 MP3 0x0187 DVD 0x0185 CPF 0x016C SETUP 0x008D TV_POWER 0x0164 GUIDE 0x016D BACK 0x009E DVD_MENU 0x008B MORE 0x0166 ALT_TAB 0x000F REPLAY 0x00A5 SKIP 0x00A3 UP 0x0067 DOWN 0x006C LEFT 0x0069 RIGHT 0x006A OK 0x0160 START 0x001C VOL_UP 0x0073 VOL_DOWN 0x0072 CH_UP 0x0192 CH_DOWN 0x0193 CAMERA 0x00D4 LIVE 0x0182 FOLDER 0x0086 WEIRD_SQUARES 0x0173 RESIZE 0x0174 REWIND 0x00A8 FAST_FORWARD 0x00D0 PLAY_PAUSE 0x00A4 STOP 0x0080 MUTE 0x0071 RECORD 0x00A7 POWER 0x0074 end codes end remote _______________________________________________ linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
