Re: Re: Twinhan (VivsionPlus) DTV Mini Cab 2021 fefe:0001 vs. 1822:0001

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Thomas Dressler wrote:

hi!

have everyone this card at work?
if yes, how? wich driver?

at first my debian hang at boot (debian with kernel 2.6.16.20).
after create a bttv in /etc/modprobe.d/ file with "options bttv card=0x71"
the bttv driver say he can`t determine an irq. i have to remove the bt-ALSA
driver.

after change the slot of the card, the bttv driver says unknown card.
Did it show as 1822:0001 before you change the slot of the card?

dmes:
...
Linux video capture interface: v1.0
bttv: driver version 0.9.16 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).
PCI: Found IRQ 10 for device 0000:00:09.0
PCI: Sharing IRQ 10 with 0000:00:09.1
bttv0: Bt787 (rev 17) at 0000:00:09.0, irq: 10, latency: 32, mmio:
0xe6000000 bttv0: subsytem: fefe:0001 (UNKNOWN)
The subsystem ID is corrupted. Does it show up as 1822:0001 again after you disconnect
the power cord for 30 minutes (to make sure it is not a heat problem)?

_______________________________________________

linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

[Index of Archives]     [Linux Media]     [Video 4 Linux]     [Asterisk]     [Samba]     [Xorg]     [Xfree86]     [Linux USB]

  Powered by Linux