Hi, Am Donnerstag, den 22.06.2006, 00:43 +0200 schrieb Hartmut Hackmann: > hi > > franck desbois wrote: > > hello hartmut > > > > i don't understand very well, cause my english is poor :(( > > > Don't worry, you should hear my french ;-) Mine too ... [snip] > > > Yes, this is known. Some channel decoders can lock with this offset, the current tda10046 driver > can't. But the upper values are the right ones. > > > i have an another problem my fm-radio don't want to work witht gnomeradio or gradio:(( > > > > this is a part of my dmesg:2.6.15-25-k7 ( 25-43) ubuntu 6.06 > > > > [17179588.984000] saa7133[0]: subsystem: 1043:4862, board: ASUSTeK P7131 Dual [c ard=78,autodetected] > > [17179588.984000] saa7133[0]: board init: gpio is 40000 > > [17179588.984000] **** SET: Misaligned resource pointer: f7528e42 Type 07 Len 0 > > [17179588.984000] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19 > > [17179588.984000] ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [APC4] -> GSI 19 ( level, high) -> IRQ 209 > > [17179588.984000] NVRM: loading NVIDIA Linux x86 Kernel Module 1.0-8762 Mon Ma y 15 13:06:38 PDT 2006 > > [17179589.196000] eth1: link up. > > [17179589.212000] saa7133[0]: i2c eeprom 00: 43 10 62 48 54 20 1c 00 43 43 a9 1c 55 d2 b2 92 > > [17179589.212000] saa7133[0]: i2c eeprom 10: 00 01 20 00 ff 20 ff ff ff ff ff ff ff ff ff ff > > [17179589.212000] saa7133[0]: i2c eeprom 20: 01 40 01 02 03 01 01 03 08 ff 00 d6 ff ff ff ff > > [17179589.212000] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > > [17179589.212000] saa7133[0]: i2c eeprom 40: ff 21 00 c2 96 10 03 32 15 00 ff ff ff ff ff ff > > [17179589.212000] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > > [17179589.212000] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > > [17179589.212000] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > > [17179589.336000] tuner 2-004b: chip found @ 0x96 (saa7133[0]) > > [17179589.336000] tuner-core.c: no tuner extensions loaded! > > [17179589.336000] tuner-core.c: no tuner extensions loaded! ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ > > [17179589.384000] tuner 2-004b: setting tuner address to 61 > > [17179589.424000] tuner 2-004b: type set to tda8290+75a > > [17179589.488000] saa7133[0]: registered device video1 [v4l2] > > [17179589.488000] saa7133[0]: registered device vbi0 > > [17179589.488000] saa7133[0]: registered device radio0 > > [17179589.500000] saa7134 ALSA driver for DMA sound loaded > > [17179589.500000] saa7133[0]/alsa: saa7133[0] at 0xe8000000 irq 201 registered a s card -1 > > > > tv analog doesn't work too :d:d: with tvtime and xawtv > > did you add a: > options tuner secam=l > to your modprobe.conf file. This really is necressary for analog tv in france. > for analog sound, you should have the analog sound cable conected in the PC. > If not, you need a tool like sox. and "depmod -a"? Please test PCI cards with the master mercurial repository tree and report all errors from there, unless Markus can confirm there are no conflicts. Try "make allmodconfig", "make", "make install". Unplug all other related devices for now and "make rmmod". Is videodev released? (lsmod?) "modprobe tuner secam=l debug=1" "modprobe saa7134 audio_debug=1 gpio_tracking=1" Please send "dmesg > dmesg.txt" for the relevant stuff and all other errors you can catch. Cheers, Hermann _______________________________________________ linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
