|
Hello, my Pinnacle PCTV Sat CI rev 1.1 is not working also
with last hg… I’ll copy there dmesg if someone could help me bttv: driver version 0.9.16 loaded bttv: using 8 buffers with 2080k (520 pages) each for
capture bt878: Unknown symbol bttv_read_gpio bt878: Unknown symbol bttv_write_gpio bt878: Unknown symbol bttv_gpio_enablebttv: driver
version 0.9.16 loaded bttv: using 8 buffers with 2080k (520 pages) each for
capture .....snip .....snip bttv: Bt8xx card found (0). ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 12 PCI: setting IRQ 12 as level-triggered ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LNKC]
-> GSI 12 (level, low) -> IRQ 12 bttv0: Bt878 (rev 17) at 0000:00:0b.0, irq: 12,
latency: 32, mmio: 0xda010000 bttv0: detected: Pinnacle PCTV SAT CI [card=113], PCI
subsystem ID is 11bd:0026 bttv0: using: Twinhan DST + clones
[card=113,autodetected] bttv0: gpio: en=00000000, out=00000000 in=00f57efd
[init] bttv0: using tuner=4 bttv0: add subdevice "dvb0" input: i2c IR (Hauppauge) as /class/input/input0 ir-kbd-i2c: i2c IR (Hauppauge) detected at
i2c-1/1-001a/ir0 [bt878 #0 [hw]] ......snip ......snip bt878: AUDIO driver version 0.0.0 loaded bt878: Bt878 AUDIO function found (0). ACPI: PCI Interrupt 0000:00:0b.1[A] -> Link [LNKC]
-> GSI 12 (level, low) -> IRQ 12 bt878_probe: card id=[0x2611bd],[ Pinnacle PCTV SAT
CI ] has DVB functions. bt878(0): Bt878 (rev 17) at 00:0b.1, irq: 12,
latency: 32, memory: 0xda011000 DVB: registering new adapter (bttv0). i2c IR (Hauppauge): unknown key: key=0x3f raw=0x3fff
down=1 dst_probe: unknown device. frontend_init: Could not find a Twinhan DST. dvb-bt8xx: A frontend driver was not found for device
109e/0878 subsystem 11bd/0026 |
_______________________________________________ linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
