Hi all, I have this card (but PCMCIA version), and I have try it. But it doesn't work for me :-( I'm Running on FC5/x86_64/2.6.17-rc4 and already updated v4l drivers. My dmesg: pccard: CardBus card inserted into slot 0 Linux video capture interface: v1.00 saa7130/34: v4l2 driver version 0.2.14 loaded PCI: Enabling device 0000:03:00.0 (0000 -> 0002) ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [LNK3] -> GSI 19 (level, low) -> IRQ 177 saa7133[0]: found at 0000:03:00.0, rev: 209, irq: 177, latency: 0, mmio: 0xe0200000 PCI: Setting latency timer of device 0000:03:00.0 to 64 saa7133[0]: subsystem: 1461:f436, board: AverTV DVB-T 777 [card=85,insmod option] saa7133[0]: board init: gpio is 220000 saa7133[0]: i2c eeprom 00: 61 14 36 f4 00 00 00 00 00 00 00 00 00 00 00 00 saa7133[0]: i2c eeprom 10: 00 ff e2 0e ff 20 ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 20: 01 40 01 02 02 01 01 03 08 ff 00 ff ff ff ff ff saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 40: ff 65 00 ff c2 1e ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c scan: found device @ 0x80 [???] saa7133[0]: i2c scan: found device @ 0xa0 [eeprom] saa7133[0]: registered device video0 [v4l2] saa7133[0]: registered device vbi0 saa7133[0]: avertv 777 dvb setup mt352_read_register: readreg error (reg=127, ret==-5) saa7133[0]: frontend initialization failed I started kaffeine, and I saw on console something like: ... /dev/dvb/adapter0/frontend0 : : No such device ... Any ideas what's wrong by me? Thanks for help, if you need more infos, please let me known. I have only a bit spare time, but if I can help, I will try.... Regards, Lubo Dňa Št 18. Máj 2006 13:52 Rikard Wissing / Compless napísal: > Hi, > > Hartmut Hackmann wrote: > > Hi, > > > > <snip> > > > >>> When you use the driver from linuxtv.org and force the card type to 85 > >>> modprobe saa7134 card=85 > >>> modprobe saa7134-dvb > >>> the dvb section might work (same channel decoder, same tuner ) > > > > <snip> > > > >> I just made a quick test with tzap and I can confirm that the DVB > >> section works! > >> Running Ubuntu Dapper and using the latest source of V4L. > >> > >> I have had this card lying around forever and now I can finally use it. > >> Thanks alot Hartmut > > > > I had a quick glance and found that all components of the board > > are supported, so it sould be possible to get the board fully working > > with reasonable effort (no idea about the remote). > > > > Interested? If yes, i will need testers and some additional > > information. > > > > Best regards > > Hartmut > > Yeah that would be great. > I would be more than happy to help you out with testing. > > // Rikard -- Ľubomír Carik Mail(s): Lubomir.Carik@xxxxxxxxx ICQ: 135524806; JID: horar@xxxxxxxxx
Attachment:
pgpVzzzTNnyqh.pgp
Description: PGP signature
_______________________________________________ linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
