Re: cinergyT2: dvbnet receive no IP datagrams

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Stephen Williams wrote:
This is usually caused by attempting to use the T2 as a USB 1.1
device. Two things to check:

1. Do you have it plugged into a USB 2.0 capable socket.
2. Do you have the correct module(s) loaded for USB 2.0 functionality
(i.e. EHCI_HCD)?

Steve


Thanks for your answer!

1. yes
2. yes, this is the output from lsmod

Module                  Size  Used by
ipv6                  218784  8
radeon                 96032  1
drm                    62228  2 radeon
nls_iso8859_1           4032  2
ntfs                  193676  2
dm_mod                 48180  0
sr_mod                 15844  0
sbp2                   19460  0
ide_generic             1216  0 [permanent]
snd_seq_dummy           3588  0
snd_seq_oss            27812  0
ide_cd                 35680  0
cdrom                  32304  2 sr_mod,ide_cd
snd_seq_midi            8096  0
snd_seq_midi_event      6592  2 snd_seq_oss,snd_seq_midi
ide_disk               14720  0
snd_seq 43852 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
cinergyT2              14596  0
dvb_core               71232  1 cinergyT2
tsdev                   7296  0
eth1394                18372  0
8139cp                 19776  0
generic                 4228  0 [permanent]
snd_via82xx            25240  0
gameport               13576  1 snd_via82xx
psmouse                34504  0
snd_ac97_codec         82848  1 snd_via82xx
snd_ac97_bus            2112  1 snd_ac97_codec
snd_pcm_oss            44128  0
snd_mixer_oss          15744  1 snd_pcm_oss
8139too                24384  0
snd_pcm                74504  3 snd_via82xx,snd_ac97_codec,snd_pcm_oss
snd_timer              20420  2 snd_seq,snd_pcm
snd_page_alloc          9864  2 snd_via82xx,snd_pcm
snd_mpu401_uart         6656  1 snd_via82xx
i2c_viapro              7956  0
via82cxxx               8068  0 [permanent]
snd_rawmidi            22496  2 snd_seq_midi,snd_mpu401_uart
snd_seq_device 8332 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq,snd_rawmidi snd 46400 11 snd_seq_oss,snd_seq,snd_via82xx,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_device
ehci_hcd               26952  0
ohci1394               29616  0
ieee1394               86648  3 sbp2,eth1394,ohci1394
shpchp                 39424  0
pci_hotplug            24308  1 shpchp
i2c_core               19536  1 i2c_viapro
ide_core 111536 5 ide_generic,ide_cd,ide_disk,generic,via82cxxx
mii                     5248  2 8139cp,8139too
uhci_hcd               26896  0
pcspkr                  3012  0
serio_raw               6532  0
rtc                    11444  0
via_agp                 9408  1
agpgart                29296  2 drm,via_agp
usbcore               111136  4 cinergyT2,ehci_hcd,uhci_hcd
soundcore               8736  1 snd
ext3                  116872  1
jbd                    47316  1 ext3
mbcache                 7684  1 ext3
sd_mod                 16464  6
sata_via                8196  4
libata                 53584  1 sata_via
scsi_mod              122700  4 sr_mod,sbp2,sd_mod,libata
evdev                   8832  1
mousedev               10496  1


Maybe I can try to unload uchi_hcd?
Am I the only one, is there anybody able to replicate this issue?

Thanks
Francesco

_______________________________________________

linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

[Index of Archives]     [Linux Media]     [Video 4 Linux]     [Asterisk]     [Samba]     [Xorg]     [Xfree86]     [Linux USB]

  Powered by Linux