Hi there,Trying to install a FusionHDTV DVB-T Plus Low Profile card. I have the same problem as this fellow:
http://www.linuxtv.org/pipermail/linux-dvb/2005-September/004932.htmlHowever, his solution does not work for me. I'm using an unpatched kernel 2.6.12 (but have also tried 2.6.16 without joy) on Ubuntu Breezy Badger. dmesg shows this:
[4294733.011000] cx2388x v4l2 driver version 0.0.4 loaded
[4294733.019000] ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 18 (level,
low) -> IRQ 18
[4294733.019000] cx88[0]: subsystem: 18ac:db10, board: Conexant DVB-T
reference design [card=19,insmod option]
[4294733.178000] cx88[0]/0: found at 0000:00:09.0, rev: 5, irq: 18,
latency: 32, mmio: 0xe6000000
[4294733.197000] cx88[0]/0: registered device video0 [v4l2]
[4294733.217000] cx88[0]/0: registered device vbi0
[4294733.344000] cx2388x dvb driver version 0.0.4 loaded
[4294733.349000] ACPI: PCI Interrupt 0000:00:09.2[A] -> GSI 18 (level,
low) -> IRQ 18
[4294733.349000] cx88[0]/2: found at 0000:00:09.2, rev: 5, irq: 18,
latency: 32, mmio: 0xe7000000
[4294733.349000] cx88[0]/2: cx2388x based dvb card
[4294733.351000] cx22702_readreg: readreg error (ret == -121)
[4294733.351000] cx88[0]: frontend initialization failed
[4294733.351000] ACPI: PCI interrupt for device 0000:00:09.2 disabled
[4294733.351000] cx88-dvb: probe of 0000:00:09.2 failed with error -1
[4294733.414000] cx2388x blackbird driver version 0.0.4 loaded
Here is an excerpt from lsmod:
cx88_blackbird 13828 0
cx88_dvb 7556 0
cx8800 28812 0
v4l1_compat 12420 1 cx8800
dvb_bt8xx 11908 0
nxt6000 6916 1 dvb_bt8xx
sp887x 7300 1 dvb_bt8xx
dst_ca 14592 1 dvb_bt8xx
dst 17412 2 dvb_bt8xx,dst_ca
bt878 9912 2 dvb_bt8xx,dst
bttv 141456 2 dvb_bt8xx,bt878
v4l2_common 5888 2 cx8800,bttv
cx24110 7300 1 dvb_bt8xx
or51211 8964 1 dvb_bt8xx
cx8802 9604 2 cx88_blackbird,cx88_dvb
mt352 6276 2 cx88_dvb,dvb_bt8xx
cx88xx 50976 4 cx88_blackbird,cx88_dvb,cx8800,cx8802
i2c_algo_bit 8584 2 bttv,cx88xx
ir_common 7428 1 cx88xx
btcx_risc 4872 4 cx8800,bttv,cx8802,cx88xx
tveeprom 12568 2 bttv,cx88xx
videodev 9344 4 cx88_blackbird,cx8800,bttv,cx88xx
or51132 9220 1 cx88_dvb
firmware_class 9472 6 cx88_blackbird,dvb_bt8xx,sp887x,bttv,
or51211,or51132
video_buf_dvb 6148 1 cx88_dvb
dvb_core 72104 3 dvb_bt8xx,dst_ca,video_buf_dvb
video_buf 19844 7 cx88_blackbird,cx88_dvb,cx8800,bttv,
cx8802,cx88xx,video_buf_dvb
cx22702 5892 1 cx88_dvb
i2c_core 19728 14 i2c_acpi_ec,dvb_bt8xx,nxt6000,sp887x,
dst,bttv,cx24110,or51211,mt352,cx88xx,
i2c_algo_bit,tveeprom,or51132,cx22702
dvb_pll 4612 3 cx88_dvb,or51132,cx22702
The symptom when I run something like scan (after manually creating the
device nodes, because udev doesn't do that for me) is "FATAL: failed to
open '/dev/dvb/adapter0/frontend0': 6 No such device or address".
I'm also having trouble with the remote. I have tried various versions of LIRC including 0.7.1 and 0.7.2 (both of which supposedly support it), specifying the "dvico" driver. I also tried to patch version 0.7.0 with <a href="http://www.itee.uq.edu.au/~chrisp/Linux-DVB/DVICO/lirc-0.7.0-dvico.diff";>this patch</a> but I kept getting make errors. With either of the other versions, lirc starts (/usr/sbin/lircd --driver=dvico --device=/dev/usb/hiddev0), and I can run irw, but it doesn't recognise key-presses. But dmesg shows this:
[4294679.706000] usbcore: registered new driver hiddev[4294679.715000] hiddev96: USB HID v1.10 Device [DVICO DVICO USB HID Remocon V1.
00] on usb-0000:00:03.1-1
[4294679.715000] usbcore: registered new driver usbhid
[4294679.715000] drivers/usb/input/hid-core.c: v2.01:USB HID core driver
Help!
TIA
--
Jeremy Malcolm LLB (Hons) B Com
Internet and Open Source lawyer, IT consultant, actor
host -t NAPTR 1.0.8.0.3.1.2.9.8.1.6.e164.org|awk -F! '{print $3}'
Attachment:
smime.p7s
Description: S/MIME Cryptographic Signature
_______________________________________________ linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
