DVico FusionHDTV 2 Test

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



I recently tried my FusionHDTV II card again, when setting up a new
MythTV box. It appears to be close to working, but not quite there. Has anyone else used this card successfully?

I applied the driver patches from Michael Krufky's www page: http://linuxtv.org/~mkrufky/fusionhdtv2.patch

The only thing I had to change in the patch was the PCI device
identifier.  In Michael's patch it was "0xd20018ac".  On my system, it
was 0xd200dbc0, as shown below:

0000:02:05.0 Multimedia video controller: Brooktree Corporation Bt878
Video Capture (rev 11)
       Subsystem: Unknown device dbc0:d200
       Flags: bus master, medium devsel, latency 32, IRQ 18
       Memory at d9000000 (32-bit, prefetchable) [size=4K]
       Capabilities: [44] Vital Product Data
       Capabilities: [4c] Power Management version 2

0000:02:05.1 Multimedia controller: Brooktree Corporation Bt878 Audio
Capture (rev 11)
       Subsystem: Unknown device dbc0:d200
       Flags: bus master, medium devsel, latency 32, IRQ 18
       Memory at d9001000 (32-bit, prefetchable) [size=4K]
       Capabilities: [44] Vital Product Data
       Capabilities: [4c] Power Management version 2



dvbscan output showed some pids, so it appears to be seeing something:

tune to: 57028615:8VSB
WARNING: filter timeout pid 0x0000
WARNING: filter timeout pid 0x1ffb

(snip)

tune to: 177028615:8VSB (tuning failed)
WARNING: filter timeout pid 0x0000
WARNING: filter timeout pid 0x1ffb

(All other channels got a "tuning failed!!!" message, like below)

tune to: 183028615:8VSB
WARNING: >>> tuning failed!!!


Does that dvbscan output point to anything?  The two channels that
worked are 2 and 7, two local channels with DTV broadcasts.  So, it's
correctly seeing something there..

The verbose output from dvbscan looks like this:
dvbscan -vvvv -a 2 scan/atsc/us-ATSC-center-frequencies-8VSB
scanning scan/atsc/us-ATSC-center-frequencies-8VSB
using '/dev/dvb/adapter2/frontend0' and '/dev/dvb/adapter2/demux0'
tune to: 57028615:8VSB
tuning status == 0x00
tuning status == 0x1f
add_filter:1363: add filter pid 0x1ffb
start_filter:1303: start filter pid 0x1ffb table_id 0xc8
update_poll_fds:1283: poll fd 4
add_filter:1363: add filter pid 0x0000
start_filter:1303: start filter pid 0x0000 table_id 0x00
update_poll_fds:1283: poll fd 5
update_poll_fds:1283: poll fd 4
WARNING: filter timeout pid 0x0000
remove_filter:1371: remove filter pid 0x0000
stop_filter:1349: stop filter pid 0x0000
update_poll_fds:1283: poll fd 4
WARNING: filter timeout pid 0x1ffb
remove_filter:1371: remove filter pid 0x1ffb
stop_filter:1349: stop filter pid 0x1ffb

_______________________________________________

linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb


[Index of Archives]     [Linux Media]     [Video 4 Linux]     [Asterisk]     [Samba]     [Xorg]     [Xfree86]     [Linux USB]

  Powered by Linux