Alexsandro Santos wrote: > Hello all, > > > It seems that CinergyT2 frontend is working, but the demux is not. The > OMAP device is not able to operate upper than 12Mbs, instead of to be > USB 2.0 capable. > > In sum: > > -Is it possible to use CinergyT2 12Mbps properly? IIRC you can't use under linux a cinergy T2 on an USB 1.1 (12Mbps) bus because the device is carrying out only the full transport stream (TS) and you need more BW (24 Mbps in italy) then the available on the USB bus AFAIK, linux driver should use a firmware (FW) with PID filtering enabled, like in the windows driver. don't know if this new firmware/driver will be ever released. > -Does someone recommend another USB card that could operate in this > speed (12Mbps)? Maybe a USB 1.1 card. i did remember that this twinhan visiondtv is USB1.1 capable, but without a very sensible tuner! http://www.twinhan.com/product_terrestrial_3.asp bye _______________________________________________ linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
