On Monday 17 April 2006 16:43, Patrick Boettcher wrote: > Hi Ron, > > On Sat, 15 Apr 2006, Ron Simpkin wrote: > > dvbscan -c > > using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' > > WARNING: filter timeout pid 0x0011 > > WARNING: filter timeout pid 0x0000 > > dumping lists (0 services) > > Done. > > > > any ideas? > > Did you try dvbscan with a initial-tuning-file? > > dvbscan -c just does PAT/PMT-parsing for the current _tuned_ channel. When > you didn't run tzap or any other application that tunes your device, the > result you get is normal. > > HTH, > Patrick. > > -- > Mail: patrick.boettcher@xxxxxxx > WWW: http://www.wi-bw.tfh-wildau.de/~pboettch/ Thanks for that Patrick it did help :) I'm a complete newb to DVB. tzap -c /usr/share/dvb/zap/dvb-t/uk-Sandy-Heath BBC-1 using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' reading channels from file '/usr/share/dvb/zap/dvb-t/uk-Sandy-Heath' tuning to 641833334 Hz video pid 0x0258, audio pid 0x0259 status 20 | signal ffff | snr ffff | ber 00000000 | unc 00000000 | and (after reading Simon Blandford's thread) tzap -c /usr/share/dvb/zap/dvb-t/uk-Sandy-Heath BBC-1 using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' reading channels from file '/usr/share/dvb/zap/dvb-t/uk-Sandy-Heath' tuning to 642000000 Hz video pid 0x0258, audio pid 0x0259 status 20 | signal ffff | snr ffff | ber 00000000 | unc 00000000 | however I'm not really expecting a signal as I'm using the crappy little ariel that came with it at the moment. What worried me was the error reported by dmesg: dvb-usb: recv bulk message failed: -110 I'm going to get a proper ariel tomorrow and wanted to know that there was only one variable for things working when I set it up ;) Ron _______________________________________________ linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
