Hi, I've just got a new Freecom USB DVB-T stick of the new type. I found Patrick Boettcher's repository and generated a patch for my kernel from it, as the repository itself wouldn't compile. Here's the output from dmesg when I plug it in: usb 3-6: new high speed USB device using ehci_hcd and address 8 dvb-usb: found a 'WideView WT-220U PenType Receiver (based on ZL353)' in cold state, will try to load a firmware dvb-usb: downloading firmware from file 'dvb-usb-wt220u-zl0353-01.fw' to the 'Cypress FX2' dvb-usb: WideView WT-220U PenType Receiver (based on ZL353) successfully initialized and connected. usbcore: registered new driver dvb_usb_dtt200u usb 3-6: USB disconnect, address 8 dvb-usb: generic DVB-USB module successfully deinitialized and disconnected. usb 3-6: new high speed USB device using ehci_hcd and address 9 dvb-usb: found a 'WideView WT-220U PenType Receiver (based on ZL353)' in warm state. dvb-usb: will use the device's hardware PID filter (table count: 15). DVB: registering new adapter (WideView WT-220U PenType Receiver (based on ZL353)). DVB: registering frontend 0 (WideView USB DVB-T)... dvb-usb: schedule remote query interval to 300 msecs. dvb-usb: WideView WT-220U PenType Receiver (based on ZL353) successfully initialized and connected. dvb-usb: recv bulk message failed: -110 and lsmod |grep dvb dvb_usb_dtt200u 9476 0 dvb_usb 15816 1 dvb_usb_dtt200u dvb_core 77352 1 dvb_usb firmware_class 8128 1 dvb_usb dvb_pll 7748 1 dvb_usb i2c_core 17808 5 dvb_usb,i2c_nforce2,w83781d,i2c_isa,eeprom and finally dvbscan -c using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' WARNING: filter timeout pid 0x0011 WARNING: filter timeout pid 0x0000 dumping lists (0 services) Done. any ideas? Ron _______________________________________________ linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
