Someone also reported this issue with em28xx based devices and a 2.6.16 kernel sounds like a bug in the usbsubsystem... Markus On 4/5/06, David Shay <davideshay@xxxxxxxxx> wrote: > > > > On 4/4/06, Michael Krufky <mkrufky@xxxxxxxxxxx> wrote: > > David Shay wrote: > > > I have a DVICO5 Fusion USB gold box and have gotten it up and running > > > OK. I am running 2.6.16 and using the drivers provided in the > > > kernel. Sometimes, however, if I run azap on a channel, it gets > > > FE_LOCK, all is fine, then I ctrl-C to stop azap. If I run azap > > > again, I will not get FE_LOCK. If I rmmod dvb_usb_cxusb and then > > > modprobe it again, it repairs the symptom. I am not getting any > > > errors in dmesg. > > > > > > This has happened on two separate systems, as well. Both gentoo, both > > > 2.6.16. One's a pentium-4 and the other an epia. > > > > > > Any other debugging or other information I can provide? > > David- > > > > Thank you for writing about this. I added support for the DViCO > > Bluebird devices, and I am also experiencing the same issue when using > > the driver under 2.6.16 ... The device is able to recover when you > > remove and re-insert the module, or if you disconnect and reconnect the > > device, but that isn't practical, considering that you are probably > > relying on the box to work in order to record HD programs. > > > > I have spoken to Patrick about this, and he tells me that the same bug > > exists in other dvb-usb devices, and also flexcop-usb boxes. I don't > > have a flexcop-usb device to test with, but I do have some ideas as to > > how to prevent this from happening on the FusionHDTV boxes. > > > > Does this occur on other kernels? Would a temporary kernel down-grade > resolve? > > _______________________________________________ > > linux-dvb@xxxxxxxxxxx > http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb > > -- Markus Rechberger _______________________________________________ linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
