Hi, I've got a DVICO FusionHD DVB-T Plus card that I'm struggling to get working on Ubuntu 5.10. I'm a relative Linux n00b, so any advice is appreciated. Here's what I've been trying following lots of googling: I've upgraded the kernel to 2.6.16 as I understand there maybe problems with the driver in the 2.6.12 kernel Ubuntu comes with. I've been trying various loading and unloading of the modules using lsmod, rmmod and modprobe-cx88-dvb. I've tried creating a file referencing the card in /etc/modprobe/ with the contents "options cx88xx card=21" But none of this seems to be working. What follows is a dump of dmesg and then lsmod. I'm hoping someone can look at this and point me in the right direction: Thanks! dmesg: [17179596.980000] Linux video capture interface: v1.00 [17179597.096000] cx2388x v4l2 driver version 0.0.5 loaded [17179597.100000] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16 [17179597.100000] ACPI: PCI Interrupt 0000:01:08.0[A] -> Link [APC1] -> GSI 16 (level, high) -> IRQ 20 [17179597.100000] CORE cx88[0]: subsystem: 18ac:db10, board: DViCO FusionHDTV DVB-T Plus [card=21,insmod option] [17179597.100000] TV tuner 4 at 0x1fe, Radio tuner -1 at 0x1fe [17179597.328000] cx88[0]/0: found at 0000:01:08.0, rev: 5, irq: 20, latency: 32, mmio: 0xe2000000 [17179597.328000] cx88[0]/0: registered device video0 [v4l2] [17179597.360000] cx88[0]/0: registered device vbi0 [17179597.360000] set_control id=0x980900 reg=0x310110 val=0x00 (mask 0xff) [17179597.360000] set_control id=0x980901 reg=0x310110 val=0x3f00 (mask 0xff00) [17179597.360000] set_control id=0x980903 reg=0x310118 val=0x00 (mask 0xff) [17179597.360000] set_control id=0x980902 reg=0x310114 val=0x5a7f (mask 0xffff) [17179597.360000] set_control id=0x980909 reg=0x320594 val=0x40 (mask 0x40) [shadowed] [17179597.360000] set_control id=0x980905 reg=0x320594 val=0x20 (mask 0x3f) [shadowed] [17179597.360000] set_control id=0x980906 reg=0x320598 val=0x40 (mask 0x7f) [shadowed] [17179597.620000] cx2388x dvb driver version 0.0.5 loaded [17179597.624000] ACPI: PCI Interrupt 0000:01:08.2[A] -> Link [APC1] -> GSI 16 (level, high) -> IRQ 20 [17179597.624000] cx88[0]/2: found at 0000:01:08.2, rev: 5, irq: 20, latency: 32, mmio: 0xe3000000 [17179597.624000] cx88[0]/2: cx2388x based dvb card [17179597.628000] cx88[0]: frontend initialization failed [17179597.628000] cx88[0]/2: cx8802_stop_dma [17179597.628000] ACPI: PCI interrupt for device 0000:01:08.2 disabled [17179597.628000] cx88-dvb: probe of 0000:01:08.2 failed with error -1 [17179597.700000] cx2388x blackbird driver version 0.0.5 loaded lsmod: cx88_blackbird 17948 0 cx88_dvb 11780 0 cx8802 10884 2 cx88_blackbird,cx88_dvb cx88_vp3054_i2c 4224 1 cx88_dvb mt352 5892 1 cx88_dvb or51132 9220 1 cx88_dvb video_buf_dvb 6148 1 cx88_dvb dvb_core 71488 1 video_buf_dvb nxt200x 12036 1 cx88_dvb firmware_class 9856 3 cx88_blackbird,or51132,nxt200x cx24123 8068 1 cx88_dvb lgdt330x 7324 1 cx88_dvb cx22702 5892 1 cx88_dvb dvb_pll 11396 4 cx88_dvb,or51132,nxt200x,cx22702 cx8800 29196 1 cx88_blackbird cx88xx 60196 4 cx88_blackbird,cx88_dvb,cx8802,cx8 800 i2c_algo_bit 8456 2 cx88_vp3054_i2c,cx88xx video_buf 20228 6 cx88_blackbird,cx88_dvb,cx8802,vid eo_buf_dvb,cx8800,cx88xx ir_common 9476 1 cx88xx tveeprom 13840 1 cx88xx compat_ioctl32 1408 1 cx8800 v4l1_compat 12292 1 cx8800 v4l2_common 7680 2 cx88_blackbird,cx8800 btcx_risc 4744 3 cx8802,cx8800,cx88xx videodev 8960 3 cx88_blackbird,cx8800,cx88xx _______________________________________________ linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
