Hello. Yes, of course: ehci-hcd is loaded at boot time on the first (my laptop) host: " [root@kim ~]# lsmod | grep usb usblp 10752 0 usbmouse 4608 0 usbhid 43648 0 usbcore 105880 6 usblp,ehci-hcd,usbmouse,usbhid,uhci-hcd " Not on the second host where dvbscan works: only support USB V1.1 . If needed, I can compile a specific kernel, for example, latest and with debug messages with good option etc.. (I need few time for that: 1 week maximum). So, it seems a personal laptop problem :/ ? I will test on a third host :) (no, I haven't a cluster at home ;-). ) Yvan. Le Jeudi 23 Mars 2006 21:50, Markus Rechberger a écrit : > Did you load a module called "ehci-hcd"? This is necessary for usb 2.0 > support > > Markus > > On 3/23/06, ygosset <ygosset@xxxxxxx> wrote: > > Hello. > > > > So, > > I've installed (compiled) the same version of Dvb Driver on this new host > > (Usb is based on a KT7A Abit motherboard), > > and, > > this is very better: dvbscan works !! > > But I don't know why at all ! :) > > > > Can I have hardware problem on my laptop with usb? (first host) > > On my laptop, > > I have 4 usb connectors on, > > and on one of them, > > I have already error of type (example with a basic usb mouse) > > " > > kernel: usb 2-2: new low speed USB device using uhci_hcd and address 4 > > kernel: usb 2-2: device not accepting address 4, error -71 > > kernel: usb 2-2: new low speed USB device using uhci_hcd and address 5 > > kernel: usb 2-2: device not accepting address 5, error -71 > > .. > > " > > (so, I have banned it everytime: I use only 3 connectors). > > > > > > > > # ./dvbscan dvb-t/fr-Paris 1>/tmp/dvbscan.txt 2>&1 > > " > > # cat /tmp/dvbscan.txt | grep -v "tune" > > scanning dvb-t/fr-Paris > > using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' > > initial transponder 474000000 0 2 9 3 1 0 0 > > initial transponder 498000000 0 2 9 3 1 0 0 > > initial transponder 522000000 0 2 9 3 1 0 0 > > initial transponder 562000000 0 2 9 3 1 0 0 > > initial transponder 586000000 0 3 9 3 1 2 0 > > 0x0000 0x0201: pmt_pid 0x0000 NTN -- Direct 8 (running) > > 0x0000 0x0202: pmt_pid 0x0000 NTN -- TMC (running) > > 0x0000 0x0203: pmt_pid 0x0000 NTN -- BFM TV (running) > > 0x0000 0x0204: pmt_pid 0x0000 NTN -- i>TELE (running) > > 0x0000 0x0205: pmt_pid 0x0000 NTN -- Europe 2 TV (running) > > 0x0000 0x0206: pmt_pid 0x0000 NTN -- Gulli (running) > > Network Name 'réseau numérique terrestre français' > > WARNING: >>> tuning failed!!! > > WARNING: >>> tuning failed!!! > > WARNING: filter timeout pid 0x0011 > > WARNING: filter timeout pid 0x0000 > > WARNING: filter timeout pid 0x0010 > > 0x0000 0x0601: pmt_pid 0x0000 (null) -- TF1 (running) > > 0x0000 0x0602: pmt_pid 0x0000 (null) -- NRJ12 (running) > > 0x0000 0x0605: pmt_pid 0x0000 (null) -- TPS STAR (running) > > 0x0000 0x0604: pmt_pid 0x0000 (null) -- Eurosport France (running, > > scrambled) 0x0000 0x0603: pmt_pid 0x0000 (null) -- LCI (running, > > scrambled) WARNING: filter timeout pid 0x0010 > > 0x0000 0x0101: pmt_pid 0x0000 GR1 -- France 2 (running) > > 0x0000 0x0103: pmt_pid 0x0000 GR1 -- France 4 (running) > > 0x0000 0x0104: pmt_pid 0x0000 GR1 -- France 5 (running) > > 0x0000 0x0105: pmt_pid 0x0000 GR1 -- ARTE (running) > > 0x0000 0x0106: pmt_pid 0x0000 GR1 -- LCP (running) > > 0x0000 0x0111: pmt_pid 0x0000 Reg -- France 3 (running) > > 0x0000 0x01ff: pmt_pid 0x0000 ATH -- (null) (running) > > WARNING: filter timeout pid 0x0010 > > WARNING: >>> tuning failed!!! > > WARNING: >>> tuning failed!!! > > dumping lists (19 services) > > Done. > > ... > > " > > During the scan, I have empty message in syslog file.. : > > " > > kernel: usb 2-2: new full speed USB device using uhci_hcd and address 3 > > kernel: dvb-usb: found a 'LEADTEK - USB2.0 WINFAST DTV DONGLE' in warm > > state. kernel: dvb-usb: will use the device's hardware PID filter (table > > count: 32). kernel: DVB: registering new adapter (LEADTEK - USB2.0 > > WINFAST DTV DONGLE). kernel: dib3000: Found a DiBcom 3000P. > > kernel: DVB: registering frontend 0 (DiBcom 3000P/M-C DVB-T)... > > kernel: MT2060: Identified Microtune MT2060 chip > > kernel: dvb-usb: schedule remote query interval to 150 msecs. > > kernel: dvb-usb: LEADTEK - USB2.0 WINFAST DTV DONGLE successfully > > initialized and connected. > > hal.hotplug[11741]: DEVPATH is not set > > kernel: > > last message repeated 3 times > > last message repeated 15 times > > last message repeated 3 times > > last message repeated 3 times > > last message repeated 27 times > > last message repeated 27 times > > last message repeated 36 times > > " > > > > > > At soon, > > Yvan. > > > > Le Mercredi 22 Mars 2006 17:49, ygosset a écrit: > > > Hello. > > > > > > I have an another old host with only USB 1.1: > > > "00:07.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 > > > Controller (rev 16) > > > 00:07.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 > > > Controller (rev 16)" > > > > > > I will test on to see what's happening. > > > (idea of Mr Treza :) ) > > > > > > Regards, Yvan. > > > > > > Le Mercredi 22 Mars 2006 17:39, vous avez écrit: > > > > Interesting that I have the same problem... > > > > > > > > using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' > > > > initial transponder 719000000 0 1 9 3 1 2 0 > > > > > > > > >>> tune to: > > > > >>> 719000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_1_2:FEC_AUTO:QAM_64: > > > > >>>TRAN SM ISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE > > > > > > > > WARNING: filter timeout pid 0x0011 > > > > WARNING: filter timeout pid 0x0000 > > > > WARNING: filter timeout pid 0x0010 > > > > dumping lists (0 services) > > > > Done. > > > > > > > > but I use an experimental v4l-dvb driver for the em2880.. > > > > > > > > On 3/22/06, ygosset <ygosset@xxxxxxx> wrote: > > > > > Hello. > > > > > > > > > > I have applied all patch to test MT2060 Tuner on my Usb device from > > > > > O.Danet (treza@xxxxxxxx), > > > > > http://www.chez.com/treza/liteon.htm . > > > > > > > > > > Here is my trace: > > > > > " > > > > > cd /tmp/DVB/v4l-dvb/v4l > > > > > > snip.. > > > > > > > > Mar 22 12:48:57 kim last message repeated 2 times > > > > > Mar 22 12:48:58 kim kernel: dvb-usb: could not submit URB no. 0 - > > > > > get them all back > > > > > Mar 22 12:50:14 kim kernel: dvb-usb: could not submit URB no. 0 - > > > > > get them all back > > > > > Mar 22 12:50:15 kim kernel: > > > > > > ... > > -- > Markus Rechberger _______________________________________________ linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
