Re: Compro VideoMate DVB-T300 auto detect problem - suggested code fix

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 14/03/2006, at 9:56 AM, Hartmut Hackmann wrote:

Hi, James

James Lawrence wrote:
Hi,
I have two Compro VideoMate DVB-T300 cards installed in my computer. The saa7134 drivers do not recognize them correctly. I have had to make code modifications to get the drivers to recognize them, as shown below. Has anyone else experienced this? If you look closely, you will see that the PCI ID of both cards is identical: 1850:0000. This is odd - Compro's subvendor ID is 185B not 1850 and 0000 is a strange subdevice ID.
My computer configuration is:
AMD64 CPU
Gigabyte GA-K8NSC-939 motherboard with NFORCE3 chipset
Gentoo Linux with 2.6.15r5 kernel
- I got the same result previously when trying with 64 bit SuSE OSS 10.0 with a 2.6.13 kernel and drivers compiled from the v4l- dvb repository.
<snip>
Funny that nobody replied...
I put your patch to my personal repository and will ask Mauro to pull soon.
I can't do much on the remote control issue - due to lack of hardware.

Best regards
   Hartmut
Thanks, Hartmut.
I'll keep looking (slowly - as time permits) at the remote control issue and will post again if I come up with anything sensible.

Regards,
James.


_______________________________________________

linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

[Index of Archives]     [Linux Media]     [Video 4 Linux]     [Asterisk]     [Samba]     [Xorg]     [Xfree86]     [Linux USB]

  Powered by Linux