Michael Krufky wrote:
maillist wrote:
# HG changeset patch
# User cmeyers@xxxxxxxxx
# Node ID c433d5da9fe9095c4fb4861106d82b1c33ec44e3
# Parent 55f98daf92cfa71671b9bd6b4168a6fe99a8f438
Verified Kworld-ATSC110
I corrected the composite input and verified the S-video. I also
verified the audio mux.
I am applying THIS part to my tree. I'll assume this means that
you've tested both svideo AND composite.
Yes, I tested all inputs and they all work with the patch I sent to you.
Currently I am only able to receive ATSC HD content, not sure why QAM
is not working.
What do you mean QAM is not working? You mean it is untested, right?
If VSB is working for you, then QAM will work too -- I have similar
hardware (nxt2004, tuv1236d, saa7135) and have tested this myself.
Chances are, the QAM testing may have been done using encrypted
channels, which wouldnt work anyway.
I have basic cable and have been told by my neighbors that there is
unencrypted QAM for all the local channels on Comcast in San Jose. I
tried using atscscan and it doesn't find anything when I give it the
QAM256 freq. table. Is there something more you are doing? I also
switched my cable to the other antenna input but still no lock, nothing.
No radio functionality, probably something in the tuv1236D driver.
There IS no driver for TUV1236D -- it is a simple, hybrid
tuner,supported by tuners.ko (and dvb-pll). The radio functionality
is built-in. Does it just not work? Do you know for sure that the
radio feature is available with this card? Andrew Burri had included
this with his original patch.... Andrew?
Well Kworld doesn't say anything about it but the TUV1236D module seems
to support it as claimed in their product flier. Is there a specific
module that should be loaded to support radio? With my other bttv boards
the radio works without any extra modules.
diff -r 55f98daf92cf -r c433d5da9fe9
linux/drivers/media/video/saa7134/saa7134-cards.c
--- a/linux/drivers/media/video/saa7134/saa7134-cards.c Wed Feb 15
02:19:47 2006 -0500
+++ b/linux/drivers/media/video/saa7134/saa7134-cards.c Wed Feb 15
02:56:12 2006 -0800
@@ -2743,29 +2743,22 @@ struct saa7134_board saa7134_boards[] =
.radio_type = UNSET,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
- .tda9887_conf = TDA9887_PRESENT,
WHY do you remove this? I am 100% sure that tda9887 is present inside
the "tin can." do:
"dmesg | grep tda988" while this is enabled and that will prove it to
you.
Nope, I never get any confirmation message from the tda9887 driver. I
hack around the tda9887 and tried probing additional i2c addresses but
it can not locate anything. I have never seen any official confirmation
anywhere that the tda9887 is present. It would be good for someone who
has the tuv1236D documents to speak up and help out. I am trying to get
this information from Philips but NDAs have to be signed because of the
ATI nxt2004 part and this is a pain in the ass. Instead I think I might
borrow a PCI bus analyzer from work tomorrow and see what I can find
out. I am going to try and capture the nxt2004 firmware that is loaded
from the Kworld driver.
.mpeg = SAA7134_MPEG_DVB,
.inputs = {{
.name = name_tv,
.vmux = 1,
.amux = TV,
.tv = 1,
-#if 0
- /* these inputs are untested */
- },{
- .name = name_comp1, /* not yet verified */
- .vmux = 4, /* a later patch by
- * Curt Meyers <cmeyers@xxxxxxxxxxxxxx>
- * uses .vmux = 3,
- */
- .amux = LINE2,
- },{
- .name = name_svideo, /* not yet verified */
- .vmux = 8,
- .amux = LINE2,
-#endif
- }},
-#if 0
+ },{
+ .name = name_comp1,
+ .vmux = 3,
+ .amux = LINE2,
+ },{
+ .name = name_svideo,
+ .vmux = 8,
+ .amux = LINE2,
+ }},
+#if 0 // The TUV1236D supports FM radio but don't know how to
activate it.
.radio = {
.name = name_radio,
.amux = LINE1,
Please include a Sign-off on all future patches. This change that I'm
about to apply is also present in your previous patch, so I will pull
your S-O-B that way, but in the future, please include it explicitly.
Sorry, every project has rules and it is hard to keep all these details
straight.
Curt
Thanks,
Mike
_______________________________________________
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
