Hi Hartmut, Am Sonntag, den 12.02.2006, 23:06 +0100 schrieb Hartmut Hackmann: > Hi > > Mikko Rönkkö wrote: > > hermann pitton wrote: > > > > [snip] > > > >> Just in case, mine is unchanged and is > >> > >> DVB: registering new adapter (saa7133[2]). > >> DVB: registering frontend 0 (Philips TDA10046H DVB-T)... > >> tda1004x: setting up plls for 48MHz sampling clock > >> tda1004x: found firmware revision 26 -- ok > >> tda1004x: setting up plls for 48MHz sampling clock > >> tda1004x: found firmware revision 26 -- ok > >> tda1004x: setting up plls for 48MHz sampling clock > >> tda1004x: found firmware revision 26 -- ok > >> > >> > >> > > > > There might be something here. Mine is giving this: > > > > DVB: registering new adapter (saa7133[0]). > > DVB: registering frontend 0 (Philips TDA10046H DVB-T)... > > tda1004x: found firmware revision 33 -- invalid > > tda1004x: booting from eeprom > > tda1004x: found firmware revision 26 -- ok > > tda1004x: found firmware revision 26 -- ok > > tda1004x: found firmware revision 26 -- ok > > > > I need to check the other scan software. > > > This looks like your driver for the tda10046 is quite old. > You should get the latest driver from the Mercurial repository > and ensure that it gets installed. yes, Mikko should definitely go mercurial, since your latest changes improved the sensitivity of the tda10046a still a lot. For me in a borderline reception area even a new transponder. Also thanks a lot for taking the 300i task to a solution. Greetings, Hermann _______________________________________________ linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
