# HG changeset patch
# Node ID 01c1e2031e44d8be87082a9ab6a30cc4033acfe8
# Parent 65c96cb81e787b0a7c92d7f5a551535775cdfa5d
Remove debug messages
From: <holgerschurig@xxxxxx>
This changes some superfluous printk statements that would
overflow the current virtual console.
Signed-off-by: <holgerschurig@xxxxxx>
diff -r 65c96cb81e78 -r 01c1e2031e44 linux/drivers/media/dvb/bt8xx/dvb-bt8xx.c
--- a/linux/drivers/media/dvb/bt8xx/dvb-bt8xx.c Sat Feb 11 08:13:01 2006 -0200
+++ b/linux/drivers/media/dvb/bt8xx/dvb-bt8xx.c Sat Feb 11 15:28:48 2006 +0100
@@ -199,7 +199,7 @@ static int cx24108_pll_set(struct dvb_fr
0x00120000,0x00140000};
#define XTAL 1011100 /* Hz, really 1.0111 MHz and a /10 prescaler */
- printk("cx24108 debug: entering SetTunerFreq, freq=%d\n",freq);
+ dprintk("cx24108 debug: entering SetTunerFreq, freq=%d\n",freq);
/* This is really the bit driving the tuner chip cx24108 */
@@ -210,7 +210,7 @@ static int cx24108_pll_set(struct dvb_fr
/* decide which VCO to use for the input frequency */
for(i=1;(i<sizeof(osci)/sizeof(osci[0]))&&(osci[i]<freq);i++);
- printk("cx24108 debug: select vco #%d (f=%d)\n",i,freq);
+ dprintk("cx24108 debug: select vco #%d (f=%d)\n",i,freq);
band=bandsel[i];
/* the gain values must be set by SetSymbolrate */
/* compute the pll divider needed, from Conexant data sheet,
@@ -226,7 +226,7 @@ static int cx24108_pll_set(struct dvb_fr
((a&0x1f)<<11);
/* everything is shifted left 11 bits to left-align the bits in the
32bit word. Output to the tuner goes MSB-aligned, after all */
- printk("cx24108 debug: pump=%d, n=%d, a=%d\n",pump,n,a);
+ dprintk("cx24108 debug: pump=%d, n=%d, a=%d\n",pump,n,a);
cx24110_pll_write(fe,band);
/* set vga and vca to their widest-band settings, as a precaution.
SetSymbolrate might not be called to set this up */
--
Holger Schurig
Friedhofsweg 4
D-61206 Nieder-Wöllstadt
06034/902590
_______________________________________________
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
