Hi, Adolfo Adolfo Gonz?lez Bl?zquez wrote: > Found on http://www.bttv-gallery.de/ > > Are those chips supported or known to work?? > > ----------------------------------------- > AverTv Hybrid+FM Cardbus: > > - Philips SAA7135HL PCI Audio/Video Broadcast Decoder - Xceive XC3028 > Silicon Tuner - Zarlink MT352 Digital Terrestrial TV Demodulator > saa7133[0]: subsystem: 1461:f436, board: AVerMedia Cardbus TV/Radio > [card=46,insmod option] > saa7133[0]: board init: gpio is 220004 > saa7133[0]: dsp access wait timeout [bit=WRR] > saa7133[0]: dsp access wait timeout [bit=WRR] > saa7133[0]: i2c eeprom 00: 61 14 36 f4 00 00 00 00 00 00 00 00 00 00 00 00 > saa7133[0]: i2c eeprom 10: 00 ff e2 0e ff 20 ff ff ff ff ff ff ff ff ff ff > saa7133[0]: i2c eeprom 20: 01 40 01 02 02 01 01 03 08 ff 00 ff ff ff ff ff > saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > > - i2cdump -y 5 0x50 b > 0 1 2 3 4 5 6 7 8 9 a b c d e f 0123456789abcdef > 00: 61 14 36 f4 00 00 00 00 00 00 00 00 00 00 00 00 a?6?............ > 10: 00 ff e2 0e ff 20 ff ff ff ff ff ff ff ff ff ff ..??. .......... > 20: 01 40 01 02 02 01 01 03 08 ff 00 ff ff ff ff ff ?@???????....... > 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ > 40: ff 65 00 ff c2 1e ff ff ff ff ff ff ff ff ff ff .e..??.......... > 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ > > from E506.inf > %34Hybrid.DeviceDesc0%=3xHybrid,PCI\VEN_1131&DEV_7134&SUBSYS_F4361461 ;E506 > %33Hybrid.DeviceDesc0%=3xHybrid,PCI\VEN_1131&DEV_7133&SUBSYS_F6361461 ;M103 > %33Hybrid.DeviceDesc0%=3xHybrid,PCI\VEN_1131&DEV_7133&SUBSYS_F7361461 ;M103-R > %33Hybrid.DeviceDesc0%=3xHybrid,PCI\VEN_1131&DEV_7133&SUBSYS_F8361461 ;M103-L > %33Hybrid.DeviceDesc1%=3xHybrid,PCI\VEN_1131&DEV_7133&SUBSYS_861E1461 ;M105 > %33Hybrid.DeviceDesc2%=3xHybrid,PCI\VEN_1131&DEV_7133&SUBSYS_F4361461 ;E506R > %33Hybrid.DeviceDesc2%=3xHybrid,PCI\VEN_1131&DEV_7133&SUBSYS_F5361461 ;E506 > %33Hybrid.DeviceDesc3%=3xHybrid,PCI\VEN_1131&DEV_7133&SUBSYS_F2361461 ;E506-Analog > %33Hybrid.DeviceDesc4%=3xHybrid,PCI\VEN_1131&DEV_7133&SUBSYS_F9361461 ;A16D > > ; Setting FM radio of the Silicon tuner via SIF (GPIO 21 in use/ 5.5MHz) > ; Dennis 20050415 for XC3028 FM Radio IF > HKR, "Audio", "FM Radio IF",0x00010001,0xDEEAAB > > 34Hybrid.DeviceDesc0 = "AVerMedia E506 (CardBus, Hybrid DVB-T and NTSC/PAL/SECAM/FM)" > 33Hybrid.DeviceDesc0 = "AVerMedia M103 (Hybrid DVB-T and NTSC/PAL/SECAM/FM)" > 33Hybrid.DeviceDesc1 = "AVerMedia TV Tuner Card, M105 (NTSC/PAL/SECAM)" > 33Hybrid.DeviceDesc2 = "AVerMedia E506 (CardBus, Hybrid DVB-T and NTSC/PAL/SECAM/FM)" > 33Hybrid.DeviceDesc3 = "AVerMedia E506 (CardBus, NTSC/PAL/SECAM)" > 33Hybrid.DeviceDesc4 = "AVerMedia A16D (Hybrid DVB-T and NTSC/PAL/SECAM/FM)" > SAA7135 is supported MT352 is supported but still has some problems. XC3028 is not supported. The problem is that nobody who could write support for it has the datasheet. Xceive seems to be very restrictve with it. But i got the hint that the tuner is not difficult to program. So it might be possible to get the required information by watching the I2C bus. Hartmut
