raid517@xxxxxxxxxxxxxx wrote: > raid517@xxxxxxxxxxxxxx wrote: > > > Hi I am using Debian Kanotix (Sid Unstable) with all the latest > > updates and kernel 2.6.15.1. I have a Compro DVB-T200 - saa7134-dvb > > vased card - but for some reason this does not appear to work. > > > > I was previously using a nova-t budget card - and this worked very > > well, so much so indeed that it required pretty much zero > > configuration (especially in Kaffiene) and worked more or less out of > > the box - but I gave that to my nephew as a gift included with a new > > PC over Xmas. > > > > My dmesg and lsmod output for the saa7134 card are attached. The > > driver appears to load fine, with no difficulties whatsoever - and I > > even have the correct firmware installed by default - which I think is > > dvb-fe-tda100046.fm (although there is no evidence in dmesg of this > > being uploaded). > > > > However there is nothing listed in my /dev section under DVB (such as > > /dev/dvb/video0, or /dev/dvb/adapter0 and so on). Indeed there are no > > DVB enteries in my /dev directory at all. (In the past these were > > always automatically created for me). > > > > Can anyone advise how best to get this card working? Is it likely that > > this card will this card ever work out of the box in the same way that > > my nova-t tv card did? > > From a quick glance, it looks to me as if you hadn't loaded the > saa7134-dvb module - It does not load by itself. Do: > > modprobe saa7134-dvb > > ...and it should take you a little bit further. :-) > > Hope this helps, > > Yay! Success at last. Again not much configuration required by me. Now > I just have to work out why there are a bunch of channels missing > (BBC3, BBC4, History etc) that my WinTV Nova-T card could pick up. > > Thanks for all the help guys! > > GJ > > _______________________________________________ > > linux-dvb@xxxxxxxxxxx > http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb > > Mmm... Well there certainly does appear to be some tuning issues with this card. About half my channels are missing - even though the Windows version of the software for this card picks them up and even though I can recieve them on my standalone DVB-T box. Does anyone have any clues what might be going on? GJ
