Hi, I've just bought an AVerTV Hybrid+FM pci card just to find out it has no linux support yet. I met mkrufky at irc (nice guy by the way) who told me to mail lspci -vn output to v4l mailing lists. So, here it is. I apologise for any inconvenience since I'm sending this mail to both v4l and dvb lists. *Notice that there's also a Best Buy (bt878 based card) on the system. SnOp ******************* lscpi -vn output *********************** pvr:/home/snop # lspci -vn 00:00.0 Class 0600: 8086:2530 (rev 04) Flags: bus master, fast devsel, latency 0 Memory at f8000000 (32-bit, prefetchable) [size=64M] Capabilities: [a0] AGP version 2.0 00:01.0 Class 0604: 8086:2532 (rev 04) Flags: bus master, 66MHz, fast devsel, latency 32 Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 Memory behind bridge: fc900000-fe9fffff Prefetchable memory behind bridge: ec500000-f46fffff 00:1e.0 Class 0604: 8086:244e (rev 04) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=02, subordinate=02, sec-latency=32 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: fea00000-feafffff Prefetchable memory behind bridge: f4700000-f47fffff 00:1f.0 Class 0601: 8086:2440 (rev 04) Flags: bus master, medium devsel, latency 0 00:1f.1 Class 0101: 8086:244b (rev 04) (prog-if 80 [Master]) Subsystem: 8086:4d44 Flags: bus master, medium devsel, latency 0 I/O ports at ffa0 [size=16] 00:1f.2 Class 0c03: 8086:2442 (rev 04) Subsystem: 8086:4d44 Flags: bus master, medium devsel, latency 0, IRQ 10 I/O ports at ef80 [size=32] 00:1f.3 Class 0c05: 8086:2443 (rev 04) Subsystem: 8086:4d44 Flags: medium devsel, IRQ 9 I/O ports at efa0 [size=16] 00:1f.5 Class 0401: 8086:2445 (rev 04) Subsystem: 8086:4d44 Flags: bus master, medium devsel, latency 0, IRQ 9 I/O ports at e800 [size=256] I/O ports at ef00 [size=64] 01:00.0 Class 0300: 10de:0172 (rev a3) Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 11 Memory at fd000000 (32-bit, non-prefetchable) [size=16M] Memory at f0000000 (32-bit, prefetchable) [size=64M] Memory at f4680000 (32-bit, prefetchable) [size=512K] Expansion ROM at fe9e0000 [disabled] [size=128K] Capabilities: [60] Power Management version 2 Capabilities: [44] AGP version 2.0 02:01.0 Class 0c03: 1033:0035 (rev 41) (prog-if 10) Subsystem: 8086:4d44 Flags: bus master, medium devsel, latency 32, IRQ 10 Memory at feafd000 (32-bit, non-prefetchable) [size=4K] Capabilities: [40] Power Management version 2 02:01.1 Class 0c03: 1033:0035 (rev 41) (prog-if 10) Subsystem: 8086:4d44 Flags: bus master, medium devsel, latency 32, IRQ 11 Memory at feafe000 (32-bit, non-prefetchable) [size=4K] Capabilities: [40] Power Management version 2 02:01.2 Class 0c03: 1033:00e0 (rev 02) (prog-if 20) Subsystem: 8086:4d44 Flags: bus master, medium devsel, latency 32, IRQ 5 Memory at feaffc00 (32-bit, non-prefetchable) [size=256] Capabilities: [40] Power Management version 2 02:0a.0 Class 0400: 109e:036e (rev 11) Flags: bus master, medium devsel, latency 32, IRQ 11 Memory at f47fe000 (32-bit, prefetchable) [size=4K] Capabilities: [44] Vital Product Data Capabilities: [4c] Power Management version 2 02:0a.1 Class 0480: 109e:0878 (rev 11) Flags: bus master, medium devsel, latency 32, IRQ 11 Memory at f47ff000 (32-bit, prefetchable) [size=4K] Capabilities: [44] Vital Product Data Capabilities: [4c] Power Management version 2 02:0c.0 Class 0480: 1131:7133 (rev d1) Subsystem: 1461:2c00 Flags: bus master, medium devsel, latency 32, IRQ 9 Memory at feaff000 (32-bit, non-prefetchable) [size=2K] Capabilities: [40] Power Management version 2 02:0d.0 Class 0200: 10ec:8139 (rev 10) Subsystem: 10ec:8139 Flags: bus master, medium devsel, latency 32, IRQ 11 I/O ports at d800 [size=256] Memory at feaff800 (32-bit, non-prefetchable) [size=256] Expansion ROM at f4700000 [disabled] [size=64K] ******************* dmesg output *********************** dmesg Linux version 2.6.13-15.7-default (geeko@buildhost) (gcc version 4.0.2 20050901 (prerelease) (SUSE Linux)) #1 Tue Nov 29 14:32:29 UTC 2005 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000000ffc0000 (usable) BIOS-e820: 000000000ffc0000 - 000000000fff8000 (ACPI data) BIOS-e820: 000000000fff8000 - 0000000010000000 (ACPI NVS) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffb80000 - 00000000ffc00000 (reserved) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 255MB LOWMEM available. On node 0 totalpages: 65472 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 61376 pages, LIFO batch:31 HighMem zone: 0 pages, LIFO batch:1 DMI 2.3 present. ACPI: RSDP (v000 AMI ) @ 0x000ff980 ACPI: RSDT (v001 D850MV MV85010A 0x20020517 MSFT 0x00001011) @ 0x0fff0000 ACPI: FADT (v001 D850MV MV85010A 0x20020517 MSFT 0x00001011) @ 0x0fff1000 ACPI: MADT (v001 D850MV MV85010A 0x20020517 MSFT 0x00001011) @ 0x0ffe3809 ACPI: DSDT (v001 D850MV MV85010A 0x00000005 MSFT 0x0100000b) @ 0x00000000 ACPI: PM-Timer IO Port: 0x408 ACPI: local apic disabled Allocating PCI resources starting at 10000000 (gap: 10000000:eec00000) Built 1 zonelists Kernel command line: root=/dev/hda2 vga=0x317 selinux=0 resume=/dev/hda1 splash=silent bootsplash: silent mode. Initializing CPU#0 PID hash table entries: 1024 (order: 10, 16384 bytes) Detected 1994.215 MHz processor. Using pmtmr for high-res timesource Console: colour dummy device 80x25 Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 253656k/261888k available (2029k kernel code, 7560k reserved, 695k data, 204k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 3992.50 BogoMIPS (lpj=7985008) Security Framework v1.0.0 initialized SELinux: Disabled at boot. Mount-cache hash table entries: 512 CPU: After generic identify, caps: 3febfbff 00000000 00000000 00000000 00000000 00000000 00000000 CPU: After vendor identify, caps: 3febfbff 00000000 00000000 00000000 00000000 00000000 00000000 CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: After all inits, caps: 3febfbff 00000000 00000000 00000080 00000000 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU0: Intel P4/Xeon Extended MCE MSRs (12) available CPU0: Thermal monitoring enabled mtrr: v2.0 (20020519) CPU: Intel(R) Pentium(R) 4 CPU 2.00GHz stepping 04 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. checking if image is initramfs... it is Freeing initrd memory: 1748k freed ACPI: Looking for DSDT in initrd... not found! not found! ACPI: setting ELCR to 0200 (from 0e20) NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfda95, last bus=2 PCI: Using configuration type 1 ACPI: Subsystem revision 20050408 ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) ACPI: Assume root bridge [\_SB_.PCI0] segment is 0 Boot video device is 0000:01:00.0 PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] ACPI: Power Resource [FDDP] (off) ACPI: Power Resource [URP1] (off) ACPI: Power Resource [URP2] (off) ACPI: Power Resource [LPTP] (off) ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 12 devices PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report TC classifier action (bugs to netdev@xxxxxxxxxxxxxxx cc hadi@xxxxxxxxxx) PCI: Bridge: 0000:00:01.0 IO window: disabled. MEM window: fc900000-fe9fffff PREFETCH window: ec500000-f46fffff PCI: Bridge: 0000:00:1e.0 IO window: d000-dfff MEM window: fea00000-feafffff PREFETCH window: f4700000-f47fffff PCI: Setting latency timer of device 0000:00:1e.0 to 64 apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) apm: overridden by ACPI. audit: initializing netlink socket (disabled) audit(1136845572.412:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Initializing Cryptographic API vesafb: framebuffer at 0xf0000000, mapped to 0xd0880000, using 6144k, total 65536k vesafb: mode is 1024x768x16, linelength=2048, pages=1 vesafb: protected mode interface info at c000:e700 vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 bootsplash 3.1.6-2004/03/31: looking for picture... silentjpeg size 76011 bytes,...found (1024x768, 12703 bytes, v3). Console: switching to colour frame buffer device 127x44 fb0: VESA VGA frame buffer device isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.12 PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize loop: loaded (max 8 devices) mice: PS/2 mouse device common for all mice input: PC Speaker md: md driver 0.90.2 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 3.38 NET: Registered protocol family 2 input: AT Translated Set 2 keyboard on isa0060/serio0 IP route cache hash table entries: 4096 (order: 2, 16384 bytes) TCP established hash table entries: 16384 (order: 5, 131072 bytes) TCP bind hash table entries: 16384 (order: 4, 65536 bytes) TCP: Hash tables configured (established 16384 bind 16384) TCP reno registered NET: Registered protocol family 1 Using IPI Shortcut mode ACPI wakeup devices: PBTN PCI1 NEC0 NEC1 NEC2 UAR1 UAR2 USB USB2 AC9 SMB ACPI: (supports S0 S1 S4 S5) Freeing unused kernel memory: 204k freed Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH2: IDE controller at PCI slot 0000:00:1f.1 ICH2: chipset revision 4 ICH2: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:DMA Probing IDE interface ide0... input: PS/2 Generic Mouse on isa0060/serio1 hda: ST360021A, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hda: max request size: 128KiB hda: 117231408 sectors (60022 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100) hda: cache flushes not supported hda: hda1 hda2 Probing IDE interface ide1... hdc: LITEON DVD-ROM LTD163D, ATAPI CD/DVD-ROM drive hdd: LITE-ON LTR-32125W, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 ACPI: CPU0 (power states: C1[C1]) Attempting manual resume swsusp: Suspend partition has wrong signature? hdc: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 hdd: ATAPI 40X CD-ROM CD-R/RW drive, 1984kB Cache, UDMA(33) SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled SGI XFS Quota Management subsystem XFS mounting filesystem hda2 Ending clean XFS mount for filesystem: hda2 bootsplash: status on console 0 changed to on md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. Adding 795176k swap on /dev/hda1. Priority:-1 extents:1 device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@xxxxxxxxxx parport: PnPBIOS parport detected. parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP] lp0: using parport0 (interrupt-driven). pci_hotplug: PCI Hot Plug PCI Core version: 0.5 shpchp: shpc_init : shpc_cap_offset == 0 shpchp: shpc_init : shpc_cap_offset == 0 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 hw_random hardware driver 1.0.0 loaded Linux agpgart interface v0.101 (c) Dave Jones agpgart: Detected an Intel i850 Chipset. agpgart: AGP aperture is 64M @ 0xf8000000 Linux video capture interface: v1.00 usbcore: registered new driver usbfs usbcore: registered new driver hub ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ACPI-0212: *** Warning: Device is not power manageable ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10 PCI: setting IRQ 10 as level-triggered ACPI: PCI Interrupt 0000:02:01.0[A] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10 ohci_hcd 0000:02:01.0: OHCI Host Controller ohci_hcd 0000:02:01.0: new USB bus registered, assigned bus number 1 ohci_hcd 0000:02:01.0: irq 10, io mem 0xfeafd000 USB Universal Host Controller Interface driver v2.3 ACPI: PCI Interrupt 0000:00:1f.2[D] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10 PCI: Setting latency timer of device 0000:00:1f.2 to 64 uhci_hcd 0000:00:1f.2: UHCI Host Controller uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1f.2: irq 10, io base 0x0000ef80 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected hub 2-0:1.0: over-current change on port 2 hub 1-0:1.0: USB hub found hub 1-0:1.0: 3 ports detected ACPI-0212: *** Warning: Device is not power manageable ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered ACPI: PCI Interrupt 0000:02:01.1[B] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 ohci_hcd 0000:02:01.1: OHCI Host Controller ohci_hcd 0000:02:01.1: new USB bus registered, assigned bus number 3 ohci_hcd 0000:02:01.1: irq 11, io mem 0xfeafe000 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ivtv_tveeprom: module not supported by Novell, setting U taint flag. ACPI-0212: *** Warning: Device is not power manageable ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 5 PCI: setting IRQ 5 as level-triggered ACPI: PCI Interrupt 0000:02:01.2[C] -> Link [LNKH] -> GSI 5 (level, low) -> IRQ 5 ehci_hcd 0000:02:01.2: EHCI Host Controller ehci_hcd 0000:02:01.2: new USB bus registered, assigned bus number 4 ehci_hcd 0000:02:01.2: irq 5, io mem 0xfeaffc00 ehci_hcd 0000:02:01.2: USB 2.0 initialized, EHCI 0.95, driver 10 Dec 2004 hub 4-0:1.0: USB hub found hub 4-0:1.0: 5 ports detected 8139too Fast Ethernet driver 0.9.27 ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 11 ACPI: PCI Interrupt 0000:02:0d.0[A] -> Link [LNKF] -> GSI 11 (level, low) -> IRQ 11 eth0: RealTek RTL8139 at 0xd11b6800, 00:00:1c:d1:ed:00, IRQ 11 eth0: Identified 8139 chip type 'RTL-8139C' ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 9 PCI: setting IRQ 9 as level-triggered ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 9 (level, low) -> IRQ 9 PCI: Setting latency timer of device 0000:00:1f.5 to 64 saa7130/34: v4l2 driver version 0.2.14 loaded bttv: driver version 0.9.16 loaded bttv: using 8 buffers with 2080k (520 pages) each for capture intel8x0_measure_ac97_clock: measured 53062 usecs intel8x0: clocking to 48000 ACPI: PCI Interrupt 0000:02:0c.0[A] -> Link [LNKB] -> GSI 9 (level, low) -> IRQ 9 saa7133[0]: found at 0000:02:0c.0, rev: 209, irq: 9, latency: 32, mmio: 0xfeaff000 saa7133[0]: subsystem: 1461:2c00, board: UNKNOWN/GENERIC [card=0,autodetected] saa7133[0]: board init: gpio is 2400 saa7133[0]: dsp access wait timeout [bit=WRR] saa7133[0]: dsp access wait timeout [bit=WRR] saa7133[0]: dsp access wait timeout [bit=WRR] bttv: Bt8xx card found (0). ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 11 ACPI: PCI Interrupt 0000:02:0a.0[A] -> Link [LNKG] -> GSI 11 (level, low) -> IRQ 11 bttv0: Bt878 (rev 17) at 0000:02:0a.0, irq: 11, latency: 32, mmio: 0xf47fe000 bttv0: using: Askey CPH061/ BESTBUY Easy TV (bt878) [card=62,insmod option] bttv0: gpio: en=00000000, out=00000000 in=00ffc0ff [init] i2c-algo-bit.o: (0) scl=1, sda=1 i2c-algo-bit.o: (1) scl=1, sda=0 i2c-algo-bit.o: (2) scl=1, sda=1 i2c-algo-bit.o: (3) scl=0, sda=1 i2c-algo-bit.o: (4) scl=1, sda=1 i2c-algo-bit.o: bt878 #0 [sw] passed test. bttv0: using tuner=37 bttv0: i2c: checking for MSP34xx @ 0x80... not found bttv0: i2c: checking for TDA9875 @ 0xb0... not found bttv0: i2c: checking for TDA7432 @ 0x8a... not found bttv0: i2c: checking for TDA9887 @ 0x86... not found saa7133[0]: i2c eeprom 00: 61 14 00 2c 00 00 00 00 00 00 00 00 00 00 00 00 saa7133[0]: i2c eeprom 10: 00 ff 82 0e ff 20 ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 20: 01 40 01 02 02 03 03 01 08 ff 00 a3 ff ff ff ff saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: registered device video0 [v4l2] saa7133[0]: registered device vbi0 btaudio: driver version 0.7 loaded [digital+analog] : chip found @ 0xc2 (bt878 #0 [sw]) tuner 1-0061: type set to 37 (LG PAL (newer TAPC series)) : chip found @ 0xc0 (saa7133[0]) : TEA5767 detected. tuner 2-0060: type set to 62 (Philips TEA5767HN FM Radio) bttv0: registered device video1 bttv0: registered device vbi1 bttv0: PLL: 28636363 => 35468950 .. ok ACPI: PCI Interrupt 0000:02:0a.1[A] -> Link [LNKG] -> GSI 11 (level, low) -> IRQ 11 btaudio: Bt878 (rev 17) at 02:0a.1, irq: 11, latency: 32, mmio: 0xf47ff000 btaudio: using card config "default" btaudio: registered device dsp0 [digital] btaudio: registered device dsp1 [analog] btaudio: registered device mixer0 bt878: AUDIO driver version 0.0.0 loaded lirc_dev: module not supported by Novell, setting U taint flag. lirc_dev: IR Remote Control driver registered, at major 60 lirc_gpio: module not supported by Novell, setting U taint flag. The bttv_* interface is obsolete and will go away, please use the new, sysfs based interface instead. lirc_gpio (-1): card type 0x3e, id 0x0 lirc_dev: lirc_register_plugin: sample_rate: 10 lirc_gpio (0): driver registered BIOS EDD facility v0.16 2004-Jun-25, 1 devices found eth0: link down ACPI: Power Button (FF) [PWRF] ACPI: Power Button (CM) [PBTN] NET: Registered protocol family 10 Disabled Privacy Extensions on device c036b920(lo) IPv6 over IPv4 tunneling driver ALSA sound/core/oss/mixer_oss.c:1274: unable to register OSS mixer device 0:0 ALSA sound/core/oss/pcm_oss.c:2446: unable to register OSS PCM device 0:0 NET: Registered protocol family 23 IrCOMM protocol (Dag Brattli) IA-32 Microcode Update Driver: v1.14 IA-32 Microcode Update Driver v1.14 unregistered powernow: This module only works with AMD K7 CPUs subfs 0.9 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 subfs: unsuccessful attempt to mount media (256) eth0: no IPv6 routers present eth0: link up, 100Mbps, full-duplex, lpa 0x41E1 Prueba el Nuevo Correo Terra; Seguro, Rápido, Fiable. -------------- next part -------------- An HTML attachment was scrubbed... URL: http://www.linuxtv.org/pipermail/linux-dvb/attachments/20060110/ffe57717/attachment-0001.htm
