Hi Mike, I did not test without the CAM module inserted. And you're right, it works fine if I remove the CAM. But I confirm that It works perfectly using the dvb-kernel drivers for 2.4 kernel with the CAM module. So I suppose there is a solution to this problem. It seems also to concern other PCI card like the KNC1 Christophe Le Mardi 3 Janvier 2006 16:14, Michael Ditum a ?crit?: > Hi Christophe, > > I'm having the same issue as you. I have posted a thread... > http://www.linuxtv.org/pipermail/linux-dvb/2005-December/006906.html but > have had no solution yet. > > The only thing I have worked out is that if I remove the CAM it works fine, > I only get the filter timeout with the CAM inserted. > > Mike > > On 30/12/05, Christophe Burgalat <c.burgalat@xxxxxxxxxxxxxxxxxxx> wrote: > > Hi, > > > > I have a WinTV-Nova-CI PCI card. > > I use this card for some months and It works perfectly using kernel > > 2.4and dvb drivers for 2.4 > > > > I try now to use 2.6 new kernel but I did not succeed to make it works. > > I use dvbscan application and I have the following messages : > > > > "using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' > > WARNING: filter timeout pid 0x0011 > > WARNING: filter timeout pid 0x0000 > > dumping lists (0 services) > > Done." > > > > It seems that tuning succeed but then nothing is received. > > > > I've tried to use 2.6.14.2 and 2.6.14.4 kernel (with udev), I also try > > cvs dvb > > drivers. > > I use the latest dvb-ttpci firmware. > > > > Here is the output of the dmesg command : > > > > "saa7146: register extension 'dvb'. > > saa7146: register extension 'budget_ci dvb'. > > saa7146: found saa7146 @ mem ce868000 (revision 1, irq 5) > > (0x13c2,0x100f). DVB: registering new adapter (TT-Budget/WinTV-NOVA-CI > > PCI). > > adapter has MAC addr = 00:d0:5c:23:c9:3f > > budget_ci: CI interface initialised > > dvb_ca adapter 0: DVB CAM detected and initialised successfully > > DVB: registering frontend 0 (ST STV0299 DVB-S)... > > " > > > > Output of the lsmod command: > > > > " > > Module Size Used by > > budget_ci 14016 0 > > tda1004x 13668 1 budget_ci > > budget_core 9796 1 budget_ci > > dvb_ttpci 329188 0 > > l64781 7268 1 dvb_ttpci > > saa7146_vv 46144 1 dvb_ttpci > > ves1820 5956 1 dvb_ttpci > > tda8083 6084 1 dvb_ttpci > > stv0297 7712 2 budget_ci,dvb_ttpci > > sp8870 7468 1 dvb_ttpci > > firmware_class 10112 4 budget_ci,tda1004x,dvb_ttpci,sp8870 > > ves1x93 6692 1 dvb_ttpci > > ttpci_eeprom 2880 2 budget_core,dvb_ttpci > > saa7146 18088 4 > > budget_ci,budget_core,dvb_ttpci,saa7146_vv stv0299 10856 > > 2 budget_ci,dvb_ttpci > > i2c_core 21152 12 > > > > budget_ci,tda1004x,budget_core,dvb_ttpci,l64781,ves1820,tda8083,stv0297,s > >p8870,ves1x93,ttpci_eeprom,stv0299 dvb_core 77384 3 > > budget_ci,budget_core,dvb_ttpci > > video_buf 21284 1 saa7146_vv > > " > > > > > > Any idea ?? > > > > Thanks > > Christophe > > > > _______________________________________________ > > > > linux-dvb@xxxxxxxxxxx > > http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
