As I said in a previous thread, I managed to make my dvb-t receiver (http://linuxtv.org/wiki/index.php/DVB_USB#WideView.2FYakumo.2FHama.2FTyphoon.2FYuan_Boxes_and_Pens) work. I has worked under WindowsXP, and it also has worked very well under kubuntu breezy, using kaffeine. But now, I don't know why, it doesn't work anymore. I tried on three different computers, running windows and/or linux. Using kaffeine, I get these error messages : ------------------- Using DVB card "WideView USB DVB-T" tuning DVB-T to 666000000 Hz inv:2 bw:0 fecH:2 fecL:9 mod:3 tm:1 gi:0 hier:0 polling.... Getting frontend event polling.... Getting frontend event Not able to lock to the signal on the given frequency dvbsi : Cant tune DVB Using DVB card "WideView USB DVB-T" tuning DVB-T to 589000000 Hz inv:2 bw:0 fecH:2 fecL:9 mod:3 tm:1 gi:0 hier:0 polling.... Getting frontend event polling.... Getting frontend event Not able to lock to the signal on the given frequency dvbsi : Cant tune DVB Using DVB card "WideView USB DVB-T" tuning DVB-T to 618000000 Hz inv:2 bw:0 fecH:2 fecL:9 mod:3 tm:1 gi:0 hier:0 polling.... Getting frontend event polling.... Getting frontend event Not able to lock to the signal on the given frequency dvbsi : Cant tune DVB Using DVB card "WideView USB DVB-T" tuning DVB-T to 738000000 Hz inv:2 bw:0 fecH:2 fecL:9 mod:3 tm:1 gi:0 hier:0 polling.... Getting frontend event polling.... Getting frontend event Not able to lock to the signal on the given frequency dvbsi : Cant tune DVB Using DVB card "WideView USB DVB-T" tuning DVB-T to 642000000 Hz inv:2 bw:0 fecH:2 fecL:9 mod:3 tm:1 gi:0 hier:0 polling.... Getting frontend event polling.... ---------------------------- Or using scan (inside dvb-apps package) : ------------------------- gaboo@nimbus:~/workspace/svn/linuxtv/linuxtv-dvb-apps-1.1.0/util/scan$ ./scan -vv dvb-t/fr-Lyon-Pilat scanning dvb-t/fr-Lyon-Pilat using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' initial transponder 666000000 0 2 0 3 1 0 0 initial transponder 589000000 0 2 0 3 1 0 0 initial transponder 618000000 0 2 0 3 1 0 0 initial transponder 738000000 0 2 0 3 1 0 0 initial transponder 642000000 0 2 0 3 1 0 0 initial transponder 682000000 0 2 0 3 1 0 0 >>> tune to: 666000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_NONE:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE >>> tuning status == 0x20 >>> tuning status == 0x20 >>> tuning status == 0x20 >>> tuning status == 0x20 >>> tuning status == 0x20 >>> tuning status == 0x20 >>> tuning status == 0x20 >>> tuning status == 0x20 >>> tuning status == 0x20 >>> tuning status == 0x20 WARNING: >>> tuning failed!!! >>> tune to: 666000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_NONE:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE (tuning failed) >>> tuning status == 0x20 >>> tuning status == 0x20 >>> tuning status == 0x20 >>> tuning status == 0x20 >>> tuning status == 0x20 >>> tuning status == 0x20 >>> tuning status == 0x20 >>> tuning status == 0x20 >>> tuning status == 0x20 >>> tuning status == 0x20 WARNING: >>> tuning failed!!! etc ... etc ... -------------------------------- It really seems broken as it neither doesn't work anymore under windows. Two, different computer under windows, and one with a clean, first install. So, is it possible that the dvb-t receiver becomes broken after using it under linux ? Dunno how, maybe uploading the firmware or some weird commands ? Thanks. Ga?l Beaudoin
