-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Same issue now here: Hi there! I installed a new mainboard, switching from a VIA KT600 to a NForce2 (Asus A7N8X-XE) chipset, switching via_sata to nv_sata and so on. I never experienced any problems watching TV with my AverMedia (bt878 / mt352) since it first ran here on my machine. I watched in the archives... The patch referred to at http://www.linuxtv.org/pipermail/linux-dvb/2005-September/004481.html is some kind of outdated for me. I tried it, but nothing else than failed HUNKs. After mainboard switch now I got this: `dmesg`: bt878(0): irq FBUS risc_pc=37a14050 bt878(0): irq FBUS risc_pc=37a14050 bt878(0): irq FBUS risc_pc=37a14050 ... (a million time or so) bt878(0): IRQ lockup, cleared int mask `gxine` (as an example application): input_dvb: ERROR: Trying to get lock... TV is sometimes watchable for about 2 or 3 seconds. My system: Software/OS Gentoo Linux Nitro-Sources 2.6.14 GCC: i686-pc-linux-gnu-3.4.4 Hardware: Mainboard: Asus A7N8X-XE DVB-T: AverMedia 771 lspci: bo.root( ~ ): lspci 00:00.0 Host bridge: nVidia Corporation nForce2 AGP (different version?) (rev c1) 00:00.1 RAM memory: nVidia Corporation nForce2 Memory Controller 1 (rev c1) 00:00.2 RAM memory: nVidia Corporation nForce2 Memory Controller 4 (rev c1) 00:00.3 RAM memory: nVidia Corporation nForce2 Memory Controller 3 (rev c1) 00:00.4 RAM memory: nVidia Corporation nForce2 Memory Controller 2 (rev c1) 00:00.5 RAM memory: nVidia Corporation nForce2 Memory Controller 5 (rev c1) 00:01.0 ISA bridge: nVidia Corporation MCP2A ISA bridge (rev a3) 00:01.1 SMBus: nVidia Corporation MCP2A SMBus (rev a1) 00:02.0 USB Controller: nVidia Corporation MCP2A USB Controller (rev a1) 00:02.1 USB Controller: nVidia Corporation MCP2A USB Controller (rev a1) 00:02.2 USB Controller: nVidia Corporation MCP2A USB Controller (rev a2) 00:04.0 Ethernet controller: nVidia Corporation MCP2A Ethernet Controller (rev a3) 00:08.0 PCI bridge: nVidia Corporation MCP2A PCI Bridge (rev a3) 00:09.0 IDE interface: nVidia Corporation MCP2A IDE (rev a3) 00:0b.0 IDE interface: nVidia Corporation nForce2 Serial ATA Controller (rev a3) 00:1e.0 PCI bridge: nVidia Corporation nForce2 AGP (rev c1) 01:00.0 VGA compatible controller: nVidia Corporation NV43 [GeForce 6600/GeForce 6600 GT] (rev a2) 02:07.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 0a) 02:07.1 Input device controller: Creative Labs SB Live! MIDI/Game Port (rev 0a) 02:0a.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11) 02:0a.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11) dmesg relative to nv_sata and AverMedia: libata version 1.12 loaded. sata_nv version 0.8 ACPI: PCI Interrupt Link [LSHD] enabled at IRQ 21 ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LSHD] -> GSI 21 (level, high) -> IRQ 17 PCI: Setting latency timer of device 0000:00:0b.0 to 64 ata1: SATA max UDMA/133 cmd 0xEC00 ctl 0xE882 bmdma 0x7F00 irq 17 ata2: SATA max UDMA/133 cmd 0xE800 ctl 0xE482 bmdma 0x7F08 irq 17 nv_sata: Primary device added nv_sata: Primary device removed nv_sata: Secondary device added nv_sata: Secondary device removed ata1: dev 0 cfg 49:2f00 82:7c6b 83:7b09 84:4003 85:7c69 86:3a01 87:4003 88:407f ata1: dev 0 ATA-7, max UDMA/133, 160086528 sectors: LBA ata1: dev 0 configured for UDMA/133 scsi0 : sata_nv ata2: dev 0 cfg 49:2f00 82:7c6b 83:7b09 84:4003 85:7c69 86:3a01 87:4003 88:407f ata2: dev 0 ATA-7, max UDMA/133, 160086528 sectors: LBA ata2: dev 0 configured for UDMA/133 scsi1 : sata_nv Vendor: ATA Model: Maxtor 6Y080M0 Rev: YAR5 Type: Direct-Access ANSI SCSI revision: 05 Vendor: ATA Model: Maxtor 6Y080M0 Rev: YAR5 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sda: 160086528 512-byte hdwr sectors (81964 MB) SCSI device sda: drive cache: write back SCSI device sda: 160086528 512-byte hdwr sectors (81964 MB) SCSI device sda: drive cache: write back sda: sda1 sda2 sda3 sda4 < sda5 > Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 SCSI device sdb: 160086528 512-byte hdwr sectors (81964 MB) SCSI device sdb: drive cache: write back SCSI device sdb: 160086528 512-byte hdwr sectors (81964 MB) SCSI device sdb: drive cache: write back sdb: sdb1 Attached scsi disk sdb at scsi1, channel 0, id 0, lun 0 Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 0 Attached scsi generic sg1 at scsi1, channel 0, id 0, lun 0, type 0 bttv: driver version 0.9.16 loaded bttv: using 8 buffers with 2080k (520 pages) each for capture bttv: Bt8xx card found (0). ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 18 ACPI: PCI Interrupt 0000:02:0a.0[A] -> Link [LNKC] -> GSI 18 (level, high) -> IRQ 20 bttv0: Bt878 (rev 17) at 0000:02:0a.0, irq: 20, latency: 64, mmio: 0xea8fe000 bttv0: detected: AVermedia AverTV DVB-T 771 [card=123], PCI subsystem ID is 1461:0771 bttv0: using: AVerMedia AVerTV DVB-T 771 [card=123,autodetected] bttv0: gpio: en=00000000, out=00000000 in=00d0b00f [init] bttv0: IRQ lockup, cleared int mask [bits: GPINT*] bttv0: using tuner=4 bttv0: registered device video0 bttv0: registered device vbi0 bttv0: PLL: 28636363 => 35468950 .. ok bttv0: add subdevice "remote0" bttv0: add subdevice "dvb0" bt878: AUDIO driver version 0.0.0 loaded bt878: Bt878 AUDIO function found (0). ACPI: PCI Interrupt 0000:02:0a.1[A] -> Link [LNKC] -> GSI 18 (level, high) -> IRQ 20 bt878(0): Bt878 (rev 17) at 02:0a.1, irq: 20, latency: 64, memory: 0xea8ff000 DVB: registering new adapter (bttv0). DVB: registering frontend 0 (Zarlink MT352 DVB-T)... Any help or updated drivers would be greatly appreciated, kraM - -- kraM - -- If I were you, I'd like to be me. ### http://streik.no-ip.org http://streik.no-ip.org/~groover/ http://streik.no-ip.org/~groover/.whoami/ -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.2 (GNU/Linux) iD8DBQFDrHJwExfjT2whVxkRAkfsAJ0Re1zxuWpSmfoSj43cpl6hPPGHlACcDsoQ THXifRHDAFiDr/nm/OLY+L8= =k6Qo -----END PGP SIGNATURE-----
