Marcus Metzler wrote: >>>>>>"Johan" == Johan firdianto <johanfirdi@xxxxxxxxxx> writes: >>>>>> >>>>>> > > Johan> Dear guys, some days ago, I posted about failed tuning > Johan> using Skystar2 PCI rev. 2.6D. I tuned the dvb pci using > Johan> C-Band freq, I get never lock. But when I tuned the dvb > Johan> pci using Ku-Band freq, it works successfully. I'm using > Johan> dvbtune (version 0.5) and linux-dvb-apps from linuxtv.org, > Johan> both of programs works fine in tuning Ku-Band, but not > Johan> C-BAND. So, I guess there's broken code in dvbtune or scan > Johan> utilities. Any guys here have tried to tune C-BAnd Freq or > Johan> having same experience with me ? > >Since you need a C-Band LNB, which is not commonly used in >Europe for DVB-S, I doubt that many people have tried it. >I guess dvbtune does not use the correct offsets for the LNB. >The driver gets the transponder frequency minus the offset frequency >of the LNB as parameter, so you have to see if you can set the offset >frequency in dvbtune by program parameters, or you have to go into the >code and change the offset. You may also try to switch inversion on. > >Marcus > > > what are the LOFS for C-band? -- Email.it, the professional e-mail, gratis per te: http://www.email.it/f Sponsor: Attiva carta Auguri Parole di TIM con soli 6 euro avrai a disposizione 100 minuti di chiamate e riceverai 2 magnifici regali! Clicca qui: http://adv.email.it/cgi-bin/foclick.cgi?mid=4425&d=19-12
