Hi Rainer, I have installed newest kernel, and now my linux could detect the dvb card. But when i tried to tune to dvb freq/dvb mpe, i just get FE_HAS Carrier but never get LOCK. Thereis something wrong with me ? I use dvbtune version 0.5. And I also use C-Band frequency. Originally freq C-BAND is 3920, so I use 1230 Khz (after I calculate of local oscillator of C-BAND freq, 5150 Khz). Our satellite is PAS 8. Anyone here could help me to resolve this ?. Thanks. Johan [root@localhost dvbtune-0.5]# ./dvbtune -f 1230 -p v -s 27900 -tone 0 Using DVB card "ST STV0299 DVB-S" tuning DVB-S to L-Band:11864152, Pol:V Srate=27900000, 22kHz=off polling.... Getting frontend event Overflow error, trying again (status = -1, errno = 75)FE_STATUS: polling.... Getting frontend event FE_STATUS: polling.... Getting frontend event FE_STATUS: FE_HAS_CARRIER polling.... Getting frontend event FE_STATUS: polling.... Getting frontend event FE_STATUS: FE_HAS_CARRIER polling.... Getting frontend event FE_STATUS: polling.... Getting frontend event FE_STATUS: FE_HAS_CARRIER polling.... Getting frontend event FE_STATUS: polling.... Getting frontend event FE_STATUS: FE_HAS_CARRIER polling.... > Am Mo Dezember 12 2005 08:13 schrieb Johan firdianto: >> hi guys, >> >> I have installed pci skystar 2 rev. 2.6D in my PC. >> I have loaded the module named stv0299 , skystar2, dvb_core, etc. >> I'am using Fedora Core 2, with native kernel. > > I don't know what the native kernel of fedore core 2 is, but a Skystar2, > rev. 2.6D works perfect for me with kernel 2.6.14.2. > > My dmesg reads > > b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded > successfully > flexcop-pci: will use the HW PID filter. > flexcop-pci: card revision 2 > ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [LNKD] -> GSI 10 (level, > low) -> IRQ 10 > DVB: registering new adapter (FlexCop Digital TV device). > b2c2-flexcop: MAC address = 00:d0:d7:0d:a8:e8 > b2c2-flexcop: found the stv0299 at i2c address: 0x68 > DVB: registering frontend 0 (ST STV0299 DVB-S)... > b2c2-flexcop: initialization of 'Sky2PC/SkyStar 2 DVB-S' at the 'PCI' > bus controlled by a 'FlexCopIIb' complete > > Rainer >
