hi guys, I have installed pci skystar 2 rev. 2.6D in my PC. I have loaded the module named stv0299 , skystar2, dvb_core, etc. I'am using Fedora Core 2, with native kernel. Dec 12 19:37:57 localhost kernel: probe_tuner: try to attach to SkyStar2 Dec 12 19:37:57 localhost kernel: drivers/media/dvb/frontends/stv0299.c: setup for tuner Samsung TBMU24112IMB Dec 12 19:37:57 localhost kernel: DVB: registering frontend 0:0 (STV0299/TSA5059/SL1935 based)... Dec 12 19:47:02 localhost kernel: master_xfer: read error ! Dec 12 19:47:02 localhost kernel: message 0: flags=0x0, addr=0x68, buf=0xa, len=1 Dec 12 19:47:02 localhost kernel: message 1: flags=0x1, addr=0x68, buf=0x0, len=1 Dec 12 19:48:07 localhost kernel: ACPI: PCI interrupt 0000:00:06.0[A] -> GSI 10 (level, low) -> IRQ 10 Dec 12 19:48:07 localhost kernel: drivers/media/dvb/b2c2/skystar2.c: FlexCopIIB(rev.195) chip found Dec 12 19:48:07 localhost kernel: drivers/media/dvb/b2c2/skystar2.c: the chip has 38 hardware filters Dec 12 19:48:07 localhost kernel: DVB: registering new adapter (SkyStar2). Dec 12 19:48:07 localhost kernel: probe_tuner: try to attach to SkyStar2 Dec 12 19:48:07 localhost kernel: drivers/media/dvb/frontends/stv0299.c: setup for tuner Samsung TBMU24112IMB Dec 12 19:48:07 localhost kernel: DVB: registering frontend 0:0 (STV0299/TSA5059/SL1935 based)... When I tried to tune PAS8, i get error like following. I have tested the card on windows 2000, the card works well using native driver. Could you help me to resolve this issue ?. I need to use this card to using dvb internet. I appreciate your help. Thanks. Johan [root@localhost scan]# cat PAS-8 # PAS 6/6B/3R at 43.0W # freq pol sr fec S 3920000 V 27900000 7/8 S 3920000 V 27900000 3/4 S 3920000 V 27900000 2/3 S 3920000 V 27900000 1/2 S 3920000 V 27900000 3/4 [root@localhost scan]# ./scan -x 0 -l C-BAND PAS-8 scanning PAS-8 using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' initial transponder 3920000 V 27900000 7 initial transponder 3920000 V 27900000 3 initial transponder 3920000 V 27900000 2 initial transponder 3920000 V 27900000 1 initial transponder 3920000 V 27900000 3 >>> tune to: 3920:v:0:27900 DiSEqC: switch pos 0, 13V, loband (index 0) diseqc_send_msg:59: DiSEqC: e0 10 38 f0 00 00 >>> tuning status == 0x00 >>> tuning status == 0x00 >>> tuning status == 0x00 >>> tuning status == 0x00 >>> tuning status == 0x00 >>> tuning status == 0x00 >>> tuning status == 0x00 >>> tuning status == 0x00 >>> tuning status == 0x00 >>> tuning status == 0x00 WARNING: >>> tuning failed!!! >>> tune to: 3920:v:0:27900 (tuning failed) DiSEqC: switch pos 0, 13V, loband (index 0) diseqc_send_msg:59: DiSEqC: e0 10 38 f0 00 00 >>> tuning status == 0x00 >>> tuning status == 0x00 >>> tuning status == 0x00 >>> tuning status == 0x00 >>> tuning status == 0x00 >>> tuning status == 0x00 >>> tuning status == 0x00 >>> tuning status == 0x00 >>> tuning status == 0x00 >>> tuning status == 0x00 WARNING: >>> tuning failed!!! >>> tune to: 3920:v:0:27900 DiSEqC: switch pos 0, 13V, loband (index 0) diseqc_send_msg:59: DiSEqC: e0 10 38 f0 00 00
