Oliver Endriss wrote: > w-thiel@xxxxxxx wrote: > >>On Sun, Dec 04, 2005 at 01:27:04PM +0100, Oliver Endriss wrote: >> >>>... >>> >>>I did some tests using >>>BBC WS English;BBC WS:11131:vC34:S13.0E:5630:0:457=eng:0:0:5003:318:3801:0 >>> >>>Test results: >>>ALPS BSRU6 (old Nova-S) ok >>>ALPS BSRU6 (FF rev. 2.1): ok >>>Grundig 29504-451 (Activy budget GR) failed [1] >>>ALPS BSRV2 (FF rev. 1.3) failed [2] >>> >>>[1] as expected, tuner supports 12..30 Msymbols/s only >>>[2] tuner supports 1..45 Msymbols/s >>> >> >>I'm quite sure you will get a lock with the ALPS BSRV2 if you use 5632 >>instead of 5630 as the symbol rate. > > > Correct! After spending two evenings for debugging I found that the NIT > does not contain the correct symbol rate. vdr automatically adjusted > the symbol rate according to the NIT -> 5630. > > For low symbol rates the ves1893 will lock if (and only if) the symbol > rate has been set correctly. 5632 works, 5631/5633 won't. > Register programming in the driver appears to be ok. > > @Klaus: > http://www.lyngsat.com/i1002.html specifies SR 6111 for your > transponder. Does it work if you change the SR to 6111? > > Oliver I'm afraid I won't be able to test that before Dec 15 (that's the next time that transponder will be used again, at least AFAIK). Klaus
