-----Ursprungligt meddelande----- Fr?n: Anton Berggren [mailto:anton@xxxxxxxxxxxxxxxx] Skickat: den 23 november 2005 17:56 Till: 'Martin Ereth' ?mne: SV: [linux-dvb] TwinhanDTV Ter-CI + Linux Hi again! Thanks for the reply i have been waiting the whole day :D im glad for every suggestions that i can get. My card is this one. http://www.twinhan.com/product_terrestrial_4.asp so it is not a USB-device. i did this... "modprobe -v bttv i2c_hw=1 card=0x71" "modprobe -v dvb-bt8xx" "modprobe -v dst dst_type=1" lsmod look like this. Module Size Used by dvb_bt8xx 14468 0 nxt6000 8324 1 dvb_bt8xx mt352 6916 1 dvb_bt8xx sp887x 8708 1 dvb_bt8xx dst_ca 18048 1 dvb_bt8xx dst 25604 2 dvb_bt8xx,dst_ca bt878 10808 2 dvb_bt8xx,dst dvb_core 84648 2 dvb_bt8xx,dst_ca cx24110 9092 1 dvb_bt8xx or51211 10500 1 dvb_bt8xx tuner 40360 0 bttv 164048 2 dvb_bt8xx,bt878 video_buf 22660 1 bttv v4l2_common 6016 1 bttv btcx_risc 5128 1 bttv tveeprom 13968 1 bttv videodev 10112 1 bttv snd_mpu401 6728 0 snd_mpu401_uart 8320 1 snd_mpu401 snd_rawmidi 26784 1 snd_mpu401_uart snd_seq_device 8972 1 snd_rawmidi snd_intel8x0 34912 4 snd_ac97_codec 96124 1 snd_intel8x0 snd_ac97_bus 2432 1 snd_ac97_codec snd_pcm_oss 53536 1 snd_mixer_oss 19840 2 snd_pcm_oss snd_pcm 94472 3 snd_intel8x0,snd_ac97_codec,snd_pcm_oss snd_timer 26372 1 snd_pcm snd 58852 14 snd_mpu401,snd_mpu401_uart,snd_rawmidi,snd_seq_device,snd_intel8x0,snd_ac97_ codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer soundcore 10848 3 snd snd_page_alloc 11016 2 snd_intel8x0,snd_pcm i2c_nforce2 6912 0 my "/var/log/syslog" look like this after loading modules. Nov 23 17:22:58 localhost kernel: Linux video capture interface: v1.00 Nov 23 17:22:58 localhost kernel: bttv: driver version 0.9.16 loaded Nov 23 17:22:58 localhost kernel: bttv: using 8 buffers with 2080k (520 pages) each for capture Nov 23 17:22:58 localhost kernel: bttv: Bt8xx card found (0). Nov 23 17:22:58 localhost kernel: ACPI: PCI Interrupt 0000:01:0a.0[A] -> Link [APC1] -> GSI 16 (level, high) -> IRQ 21 Nov 23 17:22:58 localhost kernel: bttv0: Bt878 (rev 17) at 0000:01:0a.0, irq: 21, latency: 32, mmio: 0xc0000000 Nov 23 17:22:58 localhost kernel: bttv0: detected: Twinhan VisionPlus DVB [card=113], PCI subsystem ID is 1822:0001 Nov 23 17:22:58 localhost kernel: bttv0: using: Twinhan DST + clones [card=113,insmod option] Nov 23 17:22:58 localhost kernel: bttv0: gpio: en=00000000, out=00000000 in=00f7aafd [init] Nov 23 17:22:58 localhost kernel: bttv0: using tuner=4 Nov 23 17:22:58 localhost kernel: bttv0: add subdevice "dvb0" Nov 23 17:23:19 localhost kernel: bt878: AUDIO driver version 0.0.0 loaded Nov 23 17:23:19 localhost kernel: bt878: Bt878 AUDIO function found (0). Nov 23 17:23:19 localhost kernel: ACPI: PCI Interrupt 0000:01:0a.1[A] -> Link [APC1] -> GSI 16 (level, high) -> IRQ 21 Nov 23 17:23:19 localhost kernel: bt878(0): Bt878 (rev 17) at 01:0a.1, irq: 21, latency: 32, memory: 0xc0001000 Nov 23 17:23:19 localhost kernel: DVB: registering new adapter (bttv0). Nov 23 17:23:19 localhost udev[10187]: configured rule in '/etc/udev/rules.d/udev.rules[36]' applied, 'dvb0.demux0' becomes '%c' Nov 23 17:23:19 localhost udev[10187]: creating device node '/dev/dvb/adapter0/demux0' Nov 23 17:23:20 localhost udev[10191]: configured rule in '/etc/udev/rules.d/udev.rules[36]' applied, 'dvb0.net0' becomes '%c' Nov 23 17:23:20 localhost udev[10191]: creating device node '/dev/dvb/adapter0/net0' Nov 23 17:23:20 localhost udev[10189]: configured rule in '/etc/udev/rules.d/udev.rules[36]' applied, 'dvb0.dvr0' becomes '%c' Nov 23 17:23:20 localhost udev[10189]: creating device node '/dev/dvb/adapter0/dvr0' Nov 23 17:23:20 localhost kernel: dst_get_device_id: Recognise [DTT-CI] Nov 23 17:23:20 localhost kernel: Nov 23 17:23:20 localhost kernel: DST type flags : 0x2 ts204 0x10 firmware version = 2 Nov 23 17:23:20 localhost kernel: dst_get_mac: MAC Address=[01:08:ca:16:57:00] Nov 23 17:23:20 localhost kernel: DVB: registering frontend 0 (DST DVB-T)... Nov 23 17:23:20 localhost udev[10235]: configured rule in '/etc/udev/rules.d/udev.rules[36]' applied, 'dvb0.frontend0' becomes '%c' Nov 23 17:23:20 localhost udev[10235]: creating device node '/dev/dvb/adapter0/frontend0' "/var/log/messages" Nov 23 17:22:58 localhost kernel: Linux video capture interface: v1.00 Nov 23 17:22:58 localhost kernel: bttv: driver version 0.9.16 loaded Nov 23 17:22:58 localhost kernel: bttv: using 8 buffers with 2080k (520 pages) each for capture Nov 23 17:22:58 localhost kernel: bttv: Bt8xx card found (0). Nov 23 17:22:58 localhost kernel: ACPI: PCI Interrupt 0000:01:0a.0[A] -> Link [APC1] -> GSI 16 (level, high) -> IRQ 21 Nov 23 17:22:58 localhost kernel: bttv0: Bt878 (rev 17) at 0000:01:0a.0, irq: 21, latency: 32, mmio: 0xc0000000 Nov 23 17:22:58 localhost kernel: bttv0: detected: Twinhan VisionPlus DVB [card=113], PCI subsystem ID is 1822:0001 Nov 23 17:22:58 localhost kernel: bttv0: using: Twinhan DST + clones [card=113,insmod option] Nov 23 17:22:58 localhost kernel: bttv0: using tuner=4 Nov 23 17:22:58 localhost kernel: bttv0: add subdevice "dvb0" Nov 23 17:23:19 localhost kernel: bt878: AUDIO driver version 0.0.0 loaded Nov 23 17:23:19 localhost kernel: bt878: Bt878 AUDIO function found (0). Nov 23 17:23:19 localhost kernel: ACPI: PCI Interrupt 0000:01:0a.1[A] -> Link [APC1] -> GSI 16 (level, high) -> IRQ 21 Nov 23 17:23:19 localhost kernel: bt878(0): Bt878 (rev 17) at 01:0a.1, irq: 21, latency: 32, memory: 0xc0001000 Nov 23 17:23:19 localhost kernel: DVB: registering new adapter (bttv0). Nov 23 17:23:20 localhost kernel: Nov 23 17:23:20 localhost kernel: DST type flags : 0x2 ts204 0x10 firmware version = 2 Nov 23 17:23:20 localhost kernel: DVB: registering frontend 0 (DST DVB-T)... Ive tried to recompile kernel with 2.6.14 but with the same error tuner messages.. and the read errors if i scan for channels. Hope you got that information from me that you wanted. /Regards Anton from Sweden -----Ursprungligt meddelande----- Fr?n: Martin Ereth [mailto:martin.ereth@xxxxxxxx] Skickat: den 23 november 2005 14:52 Till: anton@xxxxxxxxxxxxxxxx Kopia: linux-dvb@xxxxxxxxxxx ?mne: Re: [linux-dvb] TwinhanDTV Ter-CI + Linux Anton Berggren schrieb: > Hi! > Ive got problems to get my card working in linux with 2.6.13 kernel. > my computer finds the card and everything at the boot with no errors or > warnings. > > When i have loaded bttv,dst and dvb-8xx modules and tries to scan for > channels with "scan dvb-t/se-Vannas" i got this.. Hello! Sounds like the neccessary modules aren't loaded! I don't know exactly what device you have. If it is a usb-stick, the module dvb-usb has to be loaded. Moreover other modules beginning dvb* have to be loaded, then. Please post, what device you have (maybe a link to the picture of the vendor) and the output of lsmod. Greetings Martin Ereth
