Steve Toth wrote: > Giuliano A. Montecarlo wrote: > >> Steve Toth wrote: >> >> >> >>>> >>>> >>>> >>>> >>>>>> Is this broken on my maschine? And is there a possibility to fix it? >>>>>> >>>>>> >>>>> >>>>> And you say this used to work, but does not now? - It was broken >>>>> recently? >>>>> >>>>> Steve >>>>> >>>>> >>>>> >>>> >>>> Yes, it's broken recently, after installing a clean cvs. >>>> >>>> >>> >>> Nothing has changed in the driver, it's an app issue. Try testing >>> with szap and see what happens. >>> >>> >> > >> But mplayer and xine will fail to play anything from adapter0/dvr0. >> > > what does /var/log/messages look like? Are you seeing the SET_TONE > default CASE error? > > I was using mplayer a few days ago and this was working just fine, no > default CASE = 2 messages. szap also works for me. > > Have you tried dvbtune? > > I don't see how the driver can be wrong, unless either the app is > wrong or the calling code is passing bad values. Can you go back to a > previous build and validate the tools are good, just to be sure it's a > driver/kernel thing? > > Steve > > > No, I don't have a previous build anymore. I've recompiled kernel+dvb+v4l, with the hope that it helps, but still still the "CASE reached default with tone=2". # ./dvbtune -f 12551500 -p v -s 22000000 Using DVB card "Conexant CX24123/CX24109" tuning DVB-S to L-Band:0, Pol:V Srate=525163520, 22kHz=off ERROR setting tone : Operation not supported polling.... Getting frontend event FE_STATUS: polling.... (...) polling....
