On Fri, 2005-11-18 at 15:26 +0400, Manu Abraham wrote:
> Jeff Gustafson wrote:
> > Has anyone had a problem with a card not tuning high enough? Could the
> >card be defective?
> However, i would like to have some more info from you as to understand
> what could be causing this. For example, satellite, frequencies etc ..
> I had a faint thought about what could be causing this, Andrew also has
> a similar thought,(but these are just guesses) but to check it out
> whether that itself is the case might require a bit of time.
>
> Anyway require some info from you on your transponders/satellite etc.
>
> Regards,
> Manu
>
>
Dishnet 110deg (wanted 119deg TP11, but I thought 110deg is fine
for testing until I climb the ladder again).
Frequencies that work:
TP1 12224 R
TP2 12239 L
TP3 12253 R
(Can't get TP4 because of spot beam. I'm in Southern
California.)
TP5 12282 R
Anything above that either fails or appears to tune back to TP5
(the pid's match).
...Jeff
P.S. Sorry for the dupe message. I forgot to CC to back to the mailing
list.
