On Monday 14 Nov 2005 18:28, Barry Scott wrote: > Andrew de Quincey wrote: > >Cheapi2c monitors the i2c hardware lines on the card, so you get a raw > > dump of everything going over that bus. You have to work out which lines > > these are by yourself. IMO this is the easiest option > > The assuming is the problem. > > >(assuming you know which lines to > >attach to!). > > The spec for the mt352 is freely down loadable from Zarlink. However > with the wires being so > small its would be very challenging to attach the CheapI2C to the chip. You'll have a tuner module on there as well I assume? (and I guess you don't have docs on that?) Thats where I would attach them. If you get a multimeter which can be set into a mode where it beeps on a short circuit it is really quick to "beep out" which line is which on the tuner module. As you know the pinout of the mt352, should be relatively straightforward.
