Hi everyone, Just got a new Cinergy T2 DVB-T USB. Using FC4 2.6.12.1_1398 on x86_64. I'm not farmiliar at all with the pieces involved in getting this thing going. Can somebody give me some pointers on next steps. I installed the mythtv-suite from http://wilsonet.com/mythtv/atrpms.repo It looks like I have the modules loaded. Anything important missing? [root@fedo ~]# lsmod |egrep "dvb|v4l|tda|video|saa|ttpci|budget" budget_ci 15041 0 budget 12105 0 l64781 8645 1 budget ves1820 7237 1 budget budget_core 14793 2 budget_ci,budget stv0299 13513 2 budget_ci,budget tda8083 7237 1 budget ves1x93 7877 1 budget ttpci_eeprom 3009 1 budget_core saa7146_vv 58561 0 v4l2_common 8129 1 saa7146_vv videodev 12993 1 saa7146_vv saa7146 21193 4 budget_ci,budget,budget_core,saa7146_vv tda1004x 16453 1 budget_ci dvb_core 109181 3 budget_ci,budget,budget_core video_buf 29765 1 saa7146_vv v4l1_compat 13893 1 saa7146_vv i2c_core 27329 11 budget_ci,budget,l64781,ves1820,budget_core,stv0299,tda8083,ves1x93,ttpci_eeprom,tda1004x,i2c_dev The devices are created under /dev/dvb/adapter0/ and I can tzap. (already have a channels.conf for Munich.) [root@athome ~]# ls /dev/dvb/adapter0/<tab> demux0 dvr0 frontend0 net0 [root@athome ~]# ./tzap eurosport using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' tuning to 834000000 Hz video pid 0x0241, audio pid 0x0242 status 01 | signal ffff | snr 0000 | ber 00000000 | unc 00000000 | status 1f | signal c117 | snr 7474 | ber 00000000 | unc 0000001e | FE_HAS_LOCK status 1f | signal 7116 | snr 7878 | ber 00000000 | unc 00000046 | FE_HAS_LOCK status 1f | signal 2117 | snr 7878 | ber 00000000 | unc 00000073 | FE_HAS_LOCK status 1f | signal e117 | snr 7676 | ber 00000000 | unc 00000099 | FE_HAS_LOCK status 1f | signal 1117 | snr 7878 | ber 00000000 | unc 000000c9 | FE_HAS_LOCK status 1f | signal 6117 | snr 7878 | ber 00000000 | unc 000000f6 | FE_HAS_LOCK But where do I go from here? How can I verify the T2 is seeing a video stream. Alan
