Hartmut Hackmann wrote: > I just committed an update of the tda1004x dvb-t driver to the dvb-kernel > CVS. It only affects the tda10046 (hopefully): > > - fixed oddities at firmware download from eeprom. > - more tolerant vs crystal frequency offset. It should now work with up > to -/+100ppm deviation. This can be the cause why some boards like > the Lifeview just didn't work for some users. > - lower sampling clock to 48Mhz for low IF and 53MHz for 36MHz. Together > with some other minor changes, this increases the sensitivity a bit. > - doesn't touch the GPIOs any longer. This needs to be handled by the > board layer. > > The latter change might cause incompatibilities. However, it is necessary > since the pins are used very differently. I could not find problems with > boards i have access to. Hartmut- What is the status of the testings with this patch? Your announcement mentions some possible incompatabilities... Mauro has already send your v4l patches to -mm... Do they depend on this one? -Michael Krufky
