On Monday 07 Nov 2005 18:35, Jeremy Hall wrote: > In the new year, Oliver Endriss wrote: > > Jeremy Hall wrote: > > > Hello, > > > > > > It looks like STV0229_LOCKOUTPUT is set to on in the initialization of > > > the alps_bsru6 tuner, but when I'm changing voltage, it is set to off. > > > (state->config->lock_output == 0) and it looks like it should be 1. > > > Does anybody have any idea how this could have gotten broken? > > > > What type of card are you talking about? > > > > If state->config->lock_output should be 1 it must be set in the card > > driver (struct stv0299_config). The value of the inittab is meaningless, > > i.e. it will be overwritten by the first stv0299_set_voltage() call... > > > > FWICS, the SEC_VOLTAGE_OFF stuff touches more bits than it should. > > Otherwise the code looks strange but seems to be ok. ;-) > > > > Oliver > > It's a nexus rev2.3. The only case I see that it is set to 0 (off) is in > the cinergy_1200s_config. > > I don't THINK I have a cinergy_1200s do I? It isn't Cinergy 1200 specific. This value basically controls how the GPIOs on the stv0299 are wired up to the voltage/tone generation hardware. There are several ways to do it, so its possible several cards share the same method.
