toni martinez wrote: > Hello, > > I have more problems with dvbstream, one day I write in this forum > about the line to use, I used: > > /$dvbstream -c 1 -f 794000 -s 27500 -v 101 -a 103 -ps -i 239.0.1.2 > <http://239.0.1.2> > / > > You told me that the payload format used for streaming in rtp is > only good for TS, and I removed -ps but now VLC don't play the video, > it only shows a grey screen :S, with this line: > > /$dvbstream -c 1 -f 794000 -s 27500 -v 101 -a 103 -i 239.0.1.2 > <http://239.0.1.2/> > / > Someone told me this "Remove the -ps as said, add -udp and don't > forget to sent PID 0 and the PMT PID (vlc will need them)" but I don't > understand this, how can I send PID 0 and PMT PID? > Can you help me? I need any other flag? > // Thanks I understand it's not very easy to follow, so here's a short guide: if first you save to disk the stream with /dvbstream -c 1 -f 794000 -s 27500 -o 101 103 0 > stream.ts (wait 10 seconds) then run decode_pat stream.ts you will get a list of programs with a corresponding PMT pid. Then run decode_pmt stream.ts <program> <pmt_pid> until you find the audio/video pids you want to stream. At this point you have the PMT pid. Assuming it's 100: //dvbstream -c 1 -f 794000 -s 27500 -udp -net 239.0.0.1:5000 0 100 101 103 will stream the pids as you want. decode_pat and decode_pmt are part of libdvbpsi / -- Email.it, the professional e-mail, gratis per te: http://www.email.it/f Sponsor: PC portatili Dell: fino a 300 euro di sconto, raddoppio della memoria * Gratis e Stampante Gratis Clicca qui: http://adv.email.it/cgi-bin/foclick.cgi?mid=4145&d=7-11
