> stuart@xxxxxxxxxx wrote:
>> Im have trouble getting an old style hauppage nova-t recognised by the
>> saa7146 driver. The chips on the site are tda10045 and saa7146.
>> The problem seems to be that there is no subsystem id.
>>
>> output of lspci -vv is
>> 04:0b.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01)
>> Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
>> ParErr- Stepping- SERR- FastB2B-
>> Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
>> <TAbort- <MAbort- >SERR- <PERR-
>> Interrupt: pin A routed to IRQ 201
>> Region 0: Memory at ea026000 (32-bit, non-prefetchable)
>> [size=512]
>>
>> and lscpi -vvn is
>> 04:0b.0 Class 0480: 1131:7146 (rev 01)
>> Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
>> ParErr- Stepping- SERR- FastB2B-
>> Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
>> <TAbort- <MAbort- >SERR- <PERR-
>> Interrupt: pin A routed to IRQ 201
>> Region 0: Memory at ea026000 (32-bit, non-prefetchable)
>> [size=512]
>>
>> I also have a new style cx88 nova-t and a Twinhan VisionPlus DVB-S card
>> in
>> the system, both working fine.
>
> Please post the output of 'lspci -vnx'.
>
> Oliver
>
>From the non working card
04:0b.0 Class 0480: 1131:7146 (rev 01)
Flags: medium devsel, IRQ 201
Memory at ea027000 (32-bit, non-prefetchable) [size=512]
00: 31 11 46 71 02 00 80 02 01 00 80 04 00 20 00 00
10: 00 70 02 ea 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 09 01 00 00
>From the working card
04:0a.0 Class 0480: 1131:7146 (rev 01)
Subsystem: 13c2:1005
Flags: bus master, medium devsel, latency 32, IRQ 193
Memory at ea026000 (32-bit, non-prefetchable) [size=512]
00: 31 11 46 71 06 00 80 02 01 00 80 04 00 20 00 00
10: 00 60 02 ea 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 c2 13 05 10
30: 00 00 00 00 00 00 00 00 00 00 00 00 09 01 0f 26
Cheers
Stuart
