Come on guys, can no one give me any suggestions on this..? I'm drawing a blank on LinuxQuestions.org too. I'm at the limits of my expertise and I have no idea where to go from here... Here's my original post again. Please... someone..?: Trying to get my new USB DVB mini-stick to work. So far with no success. I have kernel 2.6.13.4 installed, and all the firmware I can find at linuxtv.org for DVB-T USB sticks installed in /usr/lib/hotplug/firmware. Kernel DVB config is set to default values. So, to start at the beginning. Does anyone know if my device is supported? There's Windows firmware available on their site. http://www.dvb.org/index.php?id=104&mid=8178 is the page for it at dvb.org. http://www.liteon.com/prod/getProduct.do?cid=1_22_1&xml_id=4_2&menu_id=4_2_22 shows a picture. On insertion of the device I get these unhelpful outputs: #dmesg usb 1-1: new full speed USB device using ohci_hcd and address 5 ohci_hcd 0000:00:0e.2: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS usb 1-1: new device strings: Mfr=0, Product=0, SerialNumber=0 usb 1-1: hotplug usb 1-1: adding 1-1:1.0 (config #1, interface 0) usb 1-1:1.0: hotplug usbserial_generic 1-1:1.0: usb_probe_interface usbserial_generic 1-1:1.0: usb_probe_interface - got id hub 1-0:1.0: state 5 ports 2 chg 0000 evt 0002 #lsusb Bus 001 Device 005: ID 04ca:f000 Lite-On Technology Corp. Bus 001 Device 001: ID 0000:0000 What have I missed? Modules not loaded? Kernel config need tweaking? Driver just non-existent? I would so appreciate some help on this one! ____________________ Rollo Gleeson
