Jakob Steidl wrote: > > Hello list, > First, I hope Im in the correct list with my dvbstream problem. > I want to stream live tv over network with dvbstream. my problem is, > that i dont reviece any data, because dvbstream cant lock to the > correct frequency (or so). > But I can watch TV with all other apps (expect vdr, but thats another > story), so I have really no idea what to do. > I use the following config: > - Cinergy 1200 DVB-C card > - dvb drivers included w/ linux- 2.6.12.5 > - dvbstream-0.5 and the current (as of october 25th, 2005) cvs version > > some output: > ## dvbstram-cvs > ventura dvbstream-cvs # ./dvbstream -f 522000000 -s 6900 160 161 > -o:test.mpg > dvbstream v0.6 - (C) Dave Chapman 2001-2004 > Released under the GPL. > Latest version available from http://www.linuxstb.org/ > Open file test.mpg > Tuning to 522000000 Hz > Using DVB card "Philips TDA10021 DVB-C", freq=522000000 > tuning DVB-C to 522000000, srate=6900000 > Getting frontend status > Not able to lock to the signal on the given frequency > MAP 0, file test.mpg: From -1 secs, To -1 secs, 0 PIDs - > dvbstream will stop after -1 seconds (71582788 minutes) > Streaming 2 streams > > ## dvbstream 0.5 > #./dvbstream -f 522000 -s 6900 160 161 -o:test.mpg > dvbstream v0.5 - (C) Dave Chapman 2001-2004 > Released under the GPL. > Latest version available from http://www.linuxstb.org/ > Using DVB card "Philips TDA10021 DVB-C" > tuning DVB-C to 522000000, srate=6900000 > polling.... > Getting frontend event > FE_STATUS: > polling.... > Getting frontend event > FE_STATUS: FE_HAS_SIGNAL FE_HAS_CARRIER > polling.... > FE_STATUS: FE_HAS_SIGNAL FE_HAS_CARRIER > polling.... > Killed <-- killed manually > > ## femon while dvbstream-cvs was running > using '/dev/dvb/adapter0/frontend0' > FE: Philips TDA10021 DVB-C (CABLE) > status 03 | signal 7272 | snr f1f1 | ber 00195000 | unc ffffffff | > status 03 | signal 7272 | snr f1f1 | ber 00195000 | unc ffffffff | > status 03 | signal 7272 | snr f0f0 | ber 00195000 | unc ffffffff | > > ## femon while dvbstream 0.5 was running > using '/dev/dvb/adapter0/frontend0' > FE: Philips TDA10021 DVB-C (CABLE) > status 03 | signal 7272 | snr f3f3 | ber 00000000 | unc ffffffff | > status 03 | signal 7272 | snr f1f1 | ber 00000000 | unc ffffffff | > status 03 | signal 7272 | snr f1f1 | ber 00000000 | unc ffffffff | > > ## femon while mplayer is running > using '/dev/dvb/adapter0/frontend0' > FE: Philips TDA10021 DVB-C (CABLE) > status 1f | signal 7272 | snr f3f3 | ber 00000000 | unc 00000000 | > FE_HAS_LOCK > status 1f | signal 7272 | snr f2f2 | ber 00000000 | unc 00000000 | > FE_HAS_LOCK > status 1f | signal 7272 | snr f3f3 | ber 00000000 | unc 00000000 | > FE_HAS_LOCK > > ## the corresponding line from the channles.conf > ORF1:522000000:INVERSION_AUTO:6900000:FEC_3_4:QAM_64:160:161:13001 > > > I hope someone can help me with this problem! > try to specify QAM and FEC (dvbstream without parameters shows a list of available options). BTW, your syntax is incorrect, the right form is: ./dvbstream -f 522000000 -s 6900 -o:test.mpg 160 161 -- Email.it, the professional e-mail, gratis per te: http://www.email.it/f Sponsor: In cambio di 10 minuti del tuo tempo per esprimere la tua opinione, * Shopmon dona 1 Euro ai progetti di solidarietà di AMREF ed UNICEF Clicca qui: http://adv.email.it/cgi-bin/foclick.cgi?mid=3669&d=27-10
