Hello list, First, I hope Im in the correct list with my dvbstream problem. I want to stream live tv over network with dvbstream. my problem is, that i dont reviece any data, because dvbstream cant lock to the correct frequency (or so). But I can watch TV with all other apps (expect vdr, but thats another story), so I have really no idea what to do. I use the following config: - Cinergy 1200 DVB-C card - dvb drivers included w/ linux- 2.6.12.5 - dvbstream-0.5 and the current (as of october 25th, 2005) cvs version some output: ## dvbstram-cvs ventura dvbstream-cvs # ./dvbstream -f 522000000 -s 6900 160 161 -o:test.mpg dvbstream v0.6 - (C) Dave Chapman 2001-2004 Released under the GPL. Latest version available from http://www.linuxstb.org/ Open file test.mpg Tuning to 522000000 Hz Using DVB card "Philips TDA10021 DVB-C", freq=522000000 tuning DVB-C to 522000000, srate=6900000 Getting frontend status Not able to lock to the signal on the given frequency MAP 0, file test.mpg: From -1 secs, To -1 secs, 0 PIDs - dvbstream will stop after -1 seconds (71582788 minutes) Streaming 2 streams ## dvbstream 0.5 #./dvbstream -f 522000 -s 6900 160 161 -o:test.mpg dvbstream v0.5 - (C) Dave Chapman 2001-2004 Released under the GPL. Latest version available from http://www.linuxstb.org/ Using DVB card "Philips TDA10021 DVB-C" tuning DVB-C to 522000000, srate=6900000 polling.... Getting frontend event FE_STATUS: polling.... Getting frontend event FE_STATUS: FE_HAS_SIGNAL FE_HAS_CARRIER polling.... FE_STATUS: FE_HAS_SIGNAL FE_HAS_CARRIER polling.... Killed <-- killed manually ## femon while dvbstream-cvs was running using '/dev/dvb/adapter0/frontend0' FE: Philips TDA10021 DVB-C (CABLE) status 03 | signal 7272 | snr f1f1 | ber 00195000 | unc ffffffff | status 03 | signal 7272 | snr f1f1 | ber 00195000 | unc ffffffff | status 03 | signal 7272 | snr f0f0 | ber 00195000 | unc ffffffff | ## femon while dvbstream 0.5 was running using '/dev/dvb/adapter0/frontend0' FE: Philips TDA10021 DVB-C (CABLE) status 03 | signal 7272 | snr f3f3 | ber 00000000 | unc ffffffff | status 03 | signal 7272 | snr f1f1 | ber 00000000 | unc ffffffff | status 03 | signal 7272 | snr f1f1 | ber 00000000 | unc ffffffff | ## femon while mplayer is running using '/dev/dvb/adapter0/frontend0' FE: Philips TDA10021 DVB-C (CABLE) status 1f | signal 7272 | snr f3f3 | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 1f | signal 7272 | snr f2f2 | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 1f | signal 7272 | snr f3f3 | ber 00000000 | unc 00000000 | FE_HAS_LOCK ## the corresponding line from the channles.conf ORF1:522000000:INVERSION_AUTO:6900000:FEC_3_4:QAM_64:160:161:13001 I hope someone can help me with this problem! Thanks in advance, Jakob
