Merlet Fabien wrote: >>>Previous version of this Hauppauge card was using a saa7146 chipset. >>> >>>They now changed it for a Conexant CX23883. >>> >>>Does someone can help me to find the drivers for this card? >>> >>>I've not seen anything in the latest kernel 2.6.13 media/common >>>directory or in CVS repository ... >>> >>The glue code for this will be handled by video4linux... You can try >>cx88 card #18 -- it might work ... But probably will not... If you would >> >> >>provide more info about the card, I would be happy to assist in adding >>support for it. First try cx88 card=18 , if that doesnt work, then >>please provide your dmesg, "lspci -vn" , and tell us every chip that you >> >> >>can see on the board, in addition any writing that you might see on the >>"tin box" ... You might have to peel off a sticker in order to get to it. >> >> > Hi Mike, > >Txs for your support, >I'm trying to configure this and I have some troubles and some doubts. >I will provide you feedback once I'm sure of the results. > >Regards >Fabien > > Fabien- Like I said, I am willing to help. Even a non-working dmesg log full of errors can help me to figure out what you might need. Try doing what I mentioned above, although I realized it would help if you also added the parameter i2c_scan=1 to your modprobe args. I also realized that I've given bad instructions for the modules. Do this: First, remove the modules: modprobe -r cx88-dvb modprobe -r cx88-blackbird modprobe -r cx8802 modprobe -r cx8800 modprobe -r cx88xx Then insert them like this: modprobe cx88xx card=18 i2c_scan=1 modprobe cx88-dvb I'd be interested to see what dmesg looks like after the above.
