I am using the CVS version of the DVB drivers with FC4 (Nexus-s card) for MythTV. After compiling the new drivers, I got some errors during insmod. So, I went ahead and added modprobe.conf to my /etc/rc.local file in order to load the module at startup (without this the dvb-ttpci module does not get loaded at startup). But, I have some issues: Here is my dmesg output: <snip> stv0299: Unknown symbol timeval_usec_diff stv0299: Unknown symbol dvb_frontend_sleep_until Linux video capture interface: v1.00 dvb_ttpci: Unknown symbol stv0299_writereg dvb_ttpci: Unknown symbol stv0299_attach <snip> saa7146: register extension 'dvb'. <snip> saa7146: found saa7146 @ mem eea5a000 (revision 1, irq 3) (0x13c2,0x000e). DVB: registering new adapter (Technotrend/Hauppauge WinTV Nexus-S rev2.3). adapter has MAC addr = 00:d0:5c:24:09:a8 dvb-ttpci: gpioirq unknown type=0 len=0 dvb-ttpci: info @ card 0: firm f0240009, rtsl b0250018, vid 71010068, app 80ff26 21 dvb-ttpci: firmware @ card 0 supports CI link layer interface dvb-ttpci: Crystal audio DAC @ card 0 detected saa7146_vv: saa7146 (0): registered device video0 [v4l2] DVB: registering frontend 0 (ST STV0299 DVB-S)... dvb-ttpci: found av7110-0. Although the module is loaded, the device permissions seem to get reset every time I reboot. As a result, I get a Cannot open DVB device - Permission Denied error at the start of Myth backend. I have to change the permissions of /dev/dvb/* manually with chmod, after which Myth is able to open the DVB card. Is there a better way to get the loaded correctly at startup with the correct device permissions? Thank you! -------------- next part -------------- An HTML attachment was scrubbed... URL: http://www.linuxtv.org/pipermail/linux-dvb/attachments/20051026/150c6e41/attachment.htm
