I've been trying for three days now to work out why I can't get this card to work. I think there's something wrong with the hotplugging: here are some lines from dmesg: usb 1-6: new high speed USB device using ehci_hcd and address 20 ehci_hcd 0000:00:02.2: port 6 high speed ehci_hcd 0000:00:02.2: GetStatus port 6 status 001005 POWER sig=se0 PE CONNECT usb 1-6: new device strings: Mfr=0, Product=0, SerialNumber=0 DEV: registering device: ID = '1-6' usb 1-6: hotplug PM: Adding info for usb:1-6 bus usb: add device 1-6 bound device '1-6' to driver 'usb' usb 1-6: adding 1-6:1.0 (config #1, interface 0) DEV: registering device: ID = '1-6:1.0' usb 1-6:1.0: hotplug PM: Adding info for usb:1-6:1.0 bus usb: add device 1-6:1.0 usb: Matched Device 1-6:1.0 with Driver dvb_usb_nova_t_usb2 dvb_usb_nova_t_usb2 1-6:1.0: usb_probe_interface dvb_usb_nova_t_usb2 1-6:1.0: usb_probe_interface - got id dvb-usb: found a 'Hauppauge WinTV-NOVA-T usb2' in cold state, will try to load a firmware CLASS: registering class device: ID = '1-6' class_hotplug - name = 1-6 class_hotplug - hotplug() returned -19 class_hotplug - name = 1-6 CLASS: Unregistering class device. ID = '1-6' class_hotplug - name = 1-6 device class '1-6': release. dvb-usb: did not find the firmware file. (dvb-usb-nova-t-usb2-01.fw) Please see linux/Documentation/dvb/ for more details on firmware-problems. dvb-usb: Hauppauge WinTV-NOVA-T usb2 error while loading driver (-2) dvb_usb_nova_t_usb2: probe of 1-6:1.0 failed with error -2 the firmware is in the correct place (I have done extinsive debugging to prove this!) The bit where the device gets unregistered before dvb-usb says it can't find the firmware looks suspicious. I am using kernel 2.6.13-4. Any ideas would be greatly appreciated! Thanks, Jonathan
