Henrik Sjoberg wrote:
>There is still some up/down missing around dst_write_tuna (which was
>actually the root of my problem).
>The following additional patch is a remedy for my problem.
>
>
Ah, forgot again, Similarly you would need one around dst_get_tuna()
too. That would completely cover, all the 4 "pipes" that are fed to the MCU.
Regards,
Manu
>Regards,
>Henrik
>
>
>
>>Ralph Metzler wrote:
>>
>>
>>
>>>Manu Abraham writes:
>>>
>>>
>>>>diff -Naurp bt8xx.orig/dst.c bt8xx/dst.c
>>>>--- bt8xx.orig/dst.c 2005-09-21 20:29:09.000000000 +0400
>>>>+++ bt8xx/dst.c 2005-10-18 19:38:27.000000000 +0400
>>>>@@ -910,6 +910,7 @@ static int dst_get_device_id(struct dst_
>>>>
>>>> static int dst_probe(struct dst_state *state)
>>>> {
>>>>+ sema_init(&state->dst_mutex, 1);
>>>> if ((rdc_8820_reset(state)) < 0) {
>>>> dprintk(verbose, DST_ERROR, 1, "RDC 8820 RESET Failed.");
>>>> return -1;
>>>>@@ -960,21 +961,23 @@ static int dst_probe(struct dst_state *s
>>>> int dst_command(struct dst_state *state, u8 *data, u8 len)
>>>> {
>>>> u8 reply;
>>>>+
>>>>+ up(&state->dst_mutex);
>>>> if ((dst_comm_init(state)) < 0) {
>>>> dprintk(verbose, DST_NOTICE, 1, "DST Communication Initialization
>>>>
>>>>
>>>Failed.");
>>>
>>>
>>>This should be down()?
>>>
>>>
>>>
>>>
>>>
>>Hello Ralph and all,
>>
>>I have attached the corrected patch. If it looks okay i can commit it to
>>CVS, such that Johannes can make the patchset at the earliest, when he
>>is back.
>>
>>
>>Regards,
>>Manu
>>
>>
>>
>>
>>
>>------------------------------------------------------------------------
>>
>>Index: linux/drivers/media/dvb/bt8xx/dst.c
>>===================================================================
>>RCS file: /cvs/linuxtv/dvb-kernel/linux/drivers/media/dvb/bt8xx/dst.c,v
>>retrieving revision 1.41
>>diff -u -b -r1.41 dst.c
>>--- linux/drivers/media/dvb/bt8xx/dst.c 21 Sep 2005 16:29:09 -0000 1.41
>>+++ linux/drivers/media/dvb/bt8xx/dst.c 18 Oct 2005 17:42:44 -0000
>>@@ -1038,8 +1041,12 @@
>> state->decode_snr = state->rxbuffer[2] << 8 | state->rxbuffer[3];
>> } else if ((state->dst_type == DST_TYPE_IS_TERR) || (state->dst_type == DST_TYPE_IS_CABLE)) {
>> state->decode_lock = (state->rxbuffer[1]) ? 1 : 0;
>>- state->decode_strength = state->rxbuffer[4] << 8;
>> state->decode_snr = state->rxbuffer[3] << 8;
>>+ if (state->dst_hw_cap & DST_TYPE_HAS_CA) {
>>+ state->decode_strength = state->rxbuffer[5] << 8;
>>+ } else {
>>+ state->decode_strength = state->rxbuffer[4] << 8;
>>+ }
>> }
>> state->cur_jiff = jiffies;
>> }
>>@@ -1122,9 +1129,11 @@
>> }
>> state->diseq_flags &= ~(HAS_LOCK | ATTEMPT_TUNE);
>>
>>+ down(&state->dst_mutex);
>>+
>> if ((dst_comm_init(state)) < 0) {
>> dprintk(verbose, DST_DEBUG, 1, "DST Communication initialization failed.");
>>- return -1;
>>+ goto error;
>> }
>> if (state->type_flags & DST_TYPE_HAS_NEWTUNE) {
>> state->tx_tuna[9] = dst_check_sum(&state->tx_tuna[0], 9);
>>@@ -1136,23 +1145,30 @@
>> if (retval < 0) {
>> dst_pio_disable(state);
>> dprintk(verbose, DST_DEBUG, 1, "write not successful");
>>- return retval;
>>+ goto error;
>> }
>> if ((dst_pio_disable(state)) < 0) {
>> dprintk(verbose, DST_DEBUG, 1, "DST PIO disable failed !");
>>- return -1;
>>+ goto error;
>> }
>> if ((read_dst(state, &reply, GET_ACK) < 0)) {
>> dprintk(verbose, DST_DEBUG, 1, "read verify not successful.");
>>- return -1;
>>+ goto error;
>> }
>> if (reply != ACK) {
>> dprintk(verbose, DST_DEBUG, 1, "write not acknowledged 0x%02x ", reply);
>>- return 0;
>>+ goto error;
>> }
>> state->diseq_flags |= ATTEMPT_TUNE;
>>
>>- return dst_get_tuna(state);
>>+ retval = dst_get_tuna(state);
>>+
>>+ up(&state->dst_mutex);
>>+ return retval;
>>+
>>+error:
>>+ up(&state->dst_mutex);
>>+ return -EIO;
>> }
>>
>> /*
>>
>>------------------------------------------------------------------------
>>
>>_______________________________________________
>>
>>linux-dvb@xxxxxxxxxxx
>>http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
>>
