Greg, is this the final resolution to this problem? I'm gonna be on the same boat pretty soon (same card combination) and was wondering if you had this completely solved. Thanks, Luis. On 10/5/05, GFarris <gfarris@xxxxxxxxxxx> wrote: > Hi Manu, > > Michael Krufky suggested I re-post this after trying what you said with the > dst module. > > Doing modprobe dst locks up my computer. > Are you saying it replaces bttv and dvb-bt8xx? > > I finally was able to get my computer to boot without locking up while both > the HDTV5 lite and the Twinhan DST (MOT) are installed by switching pci > slots with each other, and then doing: > bttv i2c_hw=1 card=0x71 > dvb-bt8xx > dst > > However, now analog doesn't work with any of the usual programs. If I > re-scan, it only finds the channels it was last tuned to. If I pull out the > Twinhan, then analog works again. Weird. > Also, I'd rather have the lite as the first card so I don't have to specify > the card # since I use it more than the Twinhan. > > Anyway, I don't understand how dst by itself, or with dvb-bt8xx can work, > since the Twinhan always barfs without the i2c_hw=1 parm. > > Thanks, > Greg Farris > > Manu Abraham <manu@xxxxxxxxxxx> wrote: > GFarris wrote: > > >SInce both of these card share drivers, I'm not sure how to add them > together. > >Also, the Twinhan will lock up if not specified in boot up > > > >By themselves this works: > > > >HDTV5 lite: > > modprobe dvb-bt8xx > > > >Twinhan DST: > > modprobe bttv i2c_hw=1 card=0x71 > > modprobe dvb-bt8xx > > modprobe dst > > > > > > > > > What you need to do is just a simple > > modprobe dst > > You will have all the necessary modules loaded. > > > Manu > > -- > >
