On Sat, Sep 10, 2005 at 04:23:40PM +1000, richardjones@xxxxxxxxxxxxxxx wrote: > I've just started from scratch installing Fedora Core 4 in my HTPC. I previously had FC3 > going in the box, but ... well, that's a story for another time. > > I can't figure why there's no /dev/dvb devices for my AvertTV 771 card. The bttv > module loads just fine: The main module is dvb-bt8xx. Please post the output of dmesg when that module is loaded. > and I can load the other modules mentioned in the AverMedia PDF (these lines are in my > /etc/rc.local for want of a better place): > > modprobe mt352 > modprobe dvb-bt8xx Not necessary - just load dvb-bt8xx and it will take care of the rest. Some distributions had dud udev rules which meant that the /dev/dvb devices didn't created properly. It's possible that it's working but you simply have the wrong device names. Check for /etc/dvb0.dvr0 etc. Hamish -- Hamish Moffatt VK3SB <hamish@xxxxxxxxxx> <hamish@xxxxxxxxxxxx>
