Manu Abraham wrote: > > I had this one fixed in latest CVS .. It should detect the card by > itself. If you could test it from the CVS that would be nice. Just got latest cvs.. and although it finds the card ok. all the output on all channels is completely scrambled (looks kinda pretty) I'll try rolling back till i get a working version. dmesg output : bttv: driver version 0.9.16 loaded bttv: using 8 buffers with 2080k (520 pages) each for capture bttv: Bt8xx card found (0). ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 16 (level, low) -> IRQ 20 bttv0: Bt878 (rev 17) at 0000:00:09.0, irq: 20, latency: 32, mmio: 0xfc000000 bttv0: detected: Twinhan VisionPlus DVB [card=113], PCI subsystem ID is 1822:0001 bttv0: using: Twinhan DST + clones [card=113,autodetected] bttv0: gpio: en=00000000, out=00000000 in=00f700fd [init] bttv0: using tuner=4 bttv0: add subdevice "dvb0" bt878: AUDIO driver version 0.0.0 loaded bt878: Bt878 AUDIO function found (0). ACPI: PCI Interrupt 0000:00:09.1[A] -> GSI 16 (level, low) -> IRQ 20 bt878(0): Bt878 (rev 17) at 00:09.1, irq: 20, latency: 32, memory: 0xfc001000 DVB: registering new adapter (bttv0). dst_get_device_id: Recognise [DTT-CI] DST type flags : 0x1 newtuner 0x2 ts204 0x10 firmware version = 2 dst_get_mac: MAC Address=[00:08:ca:14:10:00] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0001292000013b95] dst_ca_attach: registering DST-CA device DVB: registering frontend 0 (DST DVB-T)... dst_ca_open: Device opened [c1667480] dst_ca_ioctl: Getting Slot capabilities put_checksum: ========================= Checksum calculation ================== ========= put_checksum: String Length=[0x07] put_checksum: String=[ 07 40 02 00 02 00 00 ] put_checksum: Sum=[4b] put_checksum: Checksum=[b5] put_checksum: ================================================================= ========= dst_put_ci: Put Command ca_get_slot_caps: -->dst_put_ci SUCCESS ! ca_get_slot_caps: Slot cap = [1] =================================== 10 64 0 0 2 3 0 1 dst_ca_ioctl: -->CA_GET_CAP Success ! dst_ca_release: Device closed. dst_ca_open: Device opened [d59c6e80] dst_ca_ioctl: Getting Slot capabilities put_checksum: ========================= Checksum calculation ================== ========= put_checksum: String Length=[0x07] put_checksum: String=[ 07 40 02 00 02 00 00 ] put_checksum: Sum=[4b] put_checksum: Checksum=[b5] put_checksum: ================================================================= ========= dst_put_ci: Put Command ca_get_slot_caps: -->dst_put_ci SUCCESS ! ca_get_slot_caps: Slot cap = [1] =================================== 10 64 0 0 2 3 0 1 dst_ca_ioctl: -->CA_GET_CAP Success ! dst_ca_release: Device closed. --- [This E-mail has been scanned for viruses but it is your responsibility to maintain up to date anti virus software on the device that you are currently using to read this email. ]
