[linux-dvb] bt878(0): IRQ lockup, cleared int mask

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Aug 05, 2005 at 06:00:54PM +0400, Manu Abraham wrote:
> No problem here though.
> 
> [root@Orbit01 ~]# lspci
> 00:1f.2 IDE interface: Intel Corporation 82801EB (ICH5) SATA Controller (rev 
> 02)
> 02:00.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture 
> (rev 11)
> 02:00.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 
> 11)
> 02:01.0 Multimedia controller: Twinhan Technology Co. Ltd: Unknown device 4e35 
> (rev 01)

Your SATA controller isn't on the same PCI bus as your BT878.
Mine was. 0000:01 is my PCI slots:

0000:01:0d.0 Unknown mass storage controller: Silicon Image, Inc.  (formerly CMD Technology Inc) SiI 3112 [SATALink/SATARaid] Serial ATA Controller (rev 02)
0000:01:07.0 Multimedia video controller: Conexant Winfast TV2000 XP (rev 05)
0000:01:07.2 Multimedia controller: Conexant: Unknown device 8802 (rev 05)
0000:01:08.0 Multimedia video controller: Conexant Winfast TV2000 XP (rev 05)
0000:01:08.2 Multimedia controller: Conexant: Unknown device 8802 (rev 05)
0000:01:09.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01)

(Two CX23883 cards and an SAA7146, plus Atheros Wifi, onboard gigabit
RTL8169, SB Live! etc. No problem with the CX23883 or SAA7146 chipsets,
but the BT878 was bad news.

Hamish
-- 
Hamish Moffatt VK3SB <hamish@xxxxxxxxxx> <hamish@xxxxxxxxxxxx>



[Index of Archives]     [Linux Media]     [Video 4 Linux]     [Asterisk]     [Samba]     [Xorg]     [Xfree86]     [Linux USB]

  Powered by Linux