On Tue, Jul 19, 2005 at 07:52:59PM +0200, Peter Hettkamp wrote: > On Mon, Jul 18, 2005 at 08:11:55AM +0200, Adam Szalkowski wrote: > > > Tried the driver with this line changed and it did not work (szap (CVS) > > reports lock but no data from dvr0 (using -r of course)) for most channels, > > only few were tunable. > > When I remove these lines completely in cx24110_send_diseqc_msg and > > cx24110_send_burst I am able to tune to all channels again. > > So for me this would be no fix for Pinnacle PCTV Sat on a DiSEqC 2.0 switch > > with 2 LNBs. > > Can you try to remove the setting for register 77 from send_burst but keep > the CHANGED line in send_msg? I'd expect this to work, if not something > really strange may be going on. > > Btw., do you have any hint what is the difference between DiSEqC 1.x and > 2.0? AFAIK DiSEqC 2.0 adds a return channel (so set-top-boxes could automatically find out what equipment they are connected to). I've never seen a set-top-box which supports this, however. But the better DiSEqC switches do, although most LNBs don't, so even if you have a DiSEqC 2.0 switch you cannot find out what's behind it. The FE_DISEQC_RECV_SLAVE_REPLY ioctl is supposed to be used for handling DiSEqC 2.0. The DiSEqC spec is here: http://www.eutelsat.com/satellites/4_5_5.html Johannes
