Hi, On Sat, 16 Jul 2005, Todd Ignasiak wrote: > A scenario where this would be a limitation, actually one I ran into > with the Fusion windows software, is where a user wants to have two > inputs of the same type. This is probably rare with cable inputs, > but is fairly common with antenna inputs. In my area, I have two > broadcast locations in different directions. So, with my other HD > card (MyHD MDP-120) I hooked antennas to both RF inputs, and my > channels would be distributed between both inputs. I see. >>> Is an additional FE_CAN_SEL_RF needed? Would this be added >>> to the documention for the DVB API somewhere. > > Aren't there DVB-T cards that have two RF inputs? I'm surprised this > hasn't been seen before. I didn't see DVB-T cards with two RF inputs (but only one demodulator). The card with several inputs I saw are hybrid card (DVB-T/Analogue/Radio) or the second connector was just a loop-through connector. regards, Patrick. -- Mail: patrick.boettcher@xxxxxxx WWW: http://www.wi-bw.tfh-wildau.de/~pboettch/
